- don't use cp -t (due to busybox's cp)
- add intermediate link to image's tree, to simplify life in init;
this allows us to switch whole image tree with single 'ln' manipulation,
instead of going in loop through all /bin, /sbin, ... symlinks;
we employ that early (see the next point) and before /run move (to not
lose access to binaries)
- create $prefix (and $prefix_mnt) early, so everything is de-facto
started from /run/$prefix
- keep /tmp and /var/tmp inside image tree
- simplify det_lib_paths() - make it essentially the same as before
an earlier patch, but keep it as a separate function
- add a few comments and corner cases fixups
---
dracut | 31 ++++++++++--------
dracut-functions | 29 ++++++----------
modules.d/99base/init | 64 ++++++++++++++++++++++---------------
modules.d/99base/module-setup.sh | 2 +-
4 files changed, 67 insertions(+), 59 deletions(-)
diff --git a/dracut b/dracut
index 72af2c0..e26e0c3 100755
--- a/dracut
+++ b/dracut
@@ -502,7 +502,7 @@ readonly initdir=$(mktemp --tmpdir=/var/tmp/ -d -t
initramfs.XXXXXX)
dfatal "mktemp failed."
exit 1
}
-readonly imgdir=/_img newroot=/sysroot
+readonly imgdir=/_img imglnk=/__img newroot=/sysroot
# clean up after ourselves no matter how we die.
trap 'ret=$?;[[ $keep ]] && echo "Not removing $initdir." >&2 || rm -rf
"$initdir";exit $ret;' EXIT
@@ -517,34 +517,38 @@ export initdir dracutbasedir dracutmodules drivers \
add_drivers mdadmconf lvmconf filesystems \
use_fstab libdir usrlibdir fscks nofscks cttyhack \
stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
- debug imgdir prefix prefix_mnt newroot
+ debug imgdir imglnk prefix prefix_mnt newroot
# initial directory layout + host safe symlinks
if [[ $kernel_only != yes ]]; then
- for d in /{bin,sbin,etc,lib{,64},var,usr{,/{bin,sbin,lib{,64}}}}; do
+ # directories inside ${initdir}${imgdir}
+ for d in
/{bin,sbin,etc,lib{64,},var{,/tmp},usr{,/{bin,sbin,lib{64,}}},tmp}; do
if [[ -h $d ]]; then inst_symlink $d
elif [[ -d $d ]]; then inst_dir $d; fi
done
+ # directories inside ${initdir}
mkdir -m 0755 -p \
-
"${initdir}"/{dev,proc,sys,${newroot#/},root,run{,/{lock,initramfs}},tmp}
+ "${initdir}"/{dev,proc,sys,run{,/{lock,initramfs}},root,${newroot#/}}
# host safe symlinks (will be adjusted later), needed during inst*() calls
- ln -sfn "${initdir}"/tmp "${initdir}${imgdir}"/tmp
- ln -sfn "${initdir}"/tmp "${initdir}${imgdir}"/var/tmp
ln -sfn "${initdir}"/run "${initdir}${imgdir}"/run
ln -sfn "${initdir}"/run "${initdir}${imgdir}"/var/run
ln -sfn "${initdir}"/run/lock "${initdir}${imgdir}"/var/lock
else
- for d in /lib{,64}; do
+ for d in /lib{64,}; do
if [[ -h $d ]]; then inst_symlink $d
elif [[ -d $d ]]; then inst_dir $d; fi
done
fi
+
# initial sewing pass
+# go through intermediate symlink (${imglnk}) - this greatly simplifies our
life
+# inside init
+ln -sfn "${imgdir#/}" "${initdir}${imglnk}"
for d in "${initdir}${imgdir}"/*; do
if [[ ! -e "${initdir}/${d##*/}" ]]; then
- ln -sfn "${imgdir#/}/${d##*/}" "${initdir}/${d##*/}"
+ ln -sfn "${imglnk#/}/${d##*/}" "${initdir}/${d##*/}"
fi
done
@@ -669,11 +673,10 @@ if strstr "$modules_loaded" " fips " && command -v
prelink >/dev/null; then
fi
# final sewing pass
-# remove helper /run & /tmp links, set symlinks to match initramfs's root, link
+# remove helper /run link, set symlinks to match initramfs's root, link
# remaining directories (if any)
if [[ $kernel_only != yes ]]; then
- rm -f "${initdir}${imgdir}"/{run,tmp}
- ln -sfn /tmp "${initdir}${imgdir}"/var/tmp
+ rm -f "${initdir}${imgdir}"/run
ln -sfn /run "${initdir}${imgdir}"/var/run
ln -sfn /run/lock "${initdir}${imgdir}"/var/lock
fi
@@ -682,12 +685,12 @@ for d in "${initdir}${imgdir}"/*; do
if [[ -h ${s} ]]; then
# verify if everything is fine
t=$(readlink "${s}")
- if [[ $t != ${d#${initdir}/} ]]; then
- dfatal "dracut: symlink mismatch ${d##*/} -/-> ${d#${initdir}/}"
+ if [[ $t != ${imglnk#/}/${d##*/} ]]; then
+ dfatal "dracut: symlink mismatch ${d##*/} -/->
${imglnk#/}/${d##*/}"
exit 1
fi
elif [[ ! -e ${s} ]]; then
- ln -sfn "${d#${initdir}/}" "${s}"
+ ln -sfn "${imglnk#/}/${d##*/}" "${s}"
fi
done
diff --git a/dracut-functions b/dracut-functions
index 7b6aa5a..0298585 100755
--- a/dracut-functions
+++ b/dracut-functions
@@ -959,23 +959,16 @@ instmods() {
return $?
}
-# determine lib paths in specified prefix
-# if they point to the same, ignore the one that is a symlink
-# prefer lib64 over lib
+# determine lib paths in specified prefix ($1)
+# order of preference: lib64, lib, lib32
function det_lib_paths() {
- local _lib _d _d64
- _d=$(readlink -e "$1/lib")
- _d64=$(readlink -e "$1/lib64")
- if [[ $_d = $_d64 ]]; then
- [[ -h $1/lib ]] && unset _d
- [[ -h $1/lib64 ]] && unset _d64
- fi
- if [[ -n $_d64 ]]; then
- _lib=$1/lib64
- elif [[ -n $_d ]]; then
- _lib=$1/lib
- else
- return 1
- fi
- echo "$_lib"
+ local _lib
+
+ for _lib in "$1"/lib{64,}; do
+ if [[ -d $_lib ]]; then
+ echo "$_lib"
+ return 0
+ fi
+ done
+ return 1
}
diff --git a/modules.d/99base/init b/modules.d/99base/init
index 0397e36..00fcc27 100755
--- a/modules.d/99base/init
+++ b/modules.d/99base/init
@@ -81,20 +81,44 @@ mount $_fs $_opt tmpfs /dev/shm >/dev/null 2>&1
# Prepare proper tmpfs mount for /run:
# - /run is just a symlink to real staging area. This allows us to be
# independent from any mount place, with trivial symlink manipulation
-# - checking if /run is premounted, is pretty crazy in initramfs ...
-
+# - it handles both: if /run is present with content and/or if it's mounted
_opt="-o mode=0755,nosuid,nodev,exec"; _fs="-t tmpfs"
RUNDIR=/_run
ismounted /run && { _opt="$_opt,remount"; unset _fs; }
-mkdir -m 0755 -p $RUNDIR
+mkdir -m 0755 -p "$RUNDIR"
# move + remount or mount
-[ -z "$_fs" ] && mount --move /run $RUNDIR
-mount $_fs $_opt tmpfs $RUNDIR >/dev/null 2>&1
+[ -z "$_fs" ] && mount --move /run "$RUNDIR"
+mount $_fs $_opt tmpfs "$RUNDIR" >/dev/null 2>&1
# copy if mount
-[ -z "$_fs" ] || { cd /run; cp -a -t $RUNDIR .; cd /; }
+[ -n "$_fs" ] && { cd /run; cp -a . "$RUNDIR"; cd /; }
# set symlink
rm -rf /run
-ln -sfn ${RUNDIR#/} /run
+ln -sfn "${RUNDIR#/}" /run
+
+# Prepare (if applicable) image tree inside $PREFIX under /run; we do it
+# here, as we want to run everything de-facto from /run/$PREFIX/...
+if [ -n "$PREFIX" ]; then
+ mkdir -p -m 0755 "/run/.prefix"
+ cd "$IMGLNK"
+ cp -a . "/run/.prefix"
+ if [ -d "/run/$PREFIX" ]; then
+ cd "/run/$PREFIX"; cp -a . "/run/.prefix"; cd /
+ umount "/run/$PREFIX" >/dev/null 2>&1
+ rm -rf "/run/$PREFIX"
+ fi
+ if [ -n "$PREFIX_MNT" ]; then
+ mkdir -p -m 0755 "/run/$PREFIX"
+ mount -t tmpfs -o mode=0755,nosuid,nodev,exec tmpfs "/run/$PREFIX"
+ cd "/run/.prefix"; cp -a . "/run/$PREFIX"; cd /
+ rm -rf "/run/.prefix"
+ else
+ _tgt="/run/$PREFIX"
+ mkdir -p -m 0755 "${_tgt%/*}"
+ mv "/run/.prefix" "$_tgt"
+ fi
+ # switch intermediary link to the image tree we actually want to use
+ ln -sfn "run/$PREFIX" "$IMGLNK"
+fi
UDEVVERSION=$(udevadm --version)
if [ $UDEVVERSION -gt 166 ]; then
@@ -374,7 +398,7 @@ else
fi
[ "$RD_DEBUG" = "yes" ] && set -x
-# /run move, udev adjustment (if applicable), prefix handling
+# /run move, udev adjustment (if applicable)
if [ -d "$NEWROOT/run" ]; then
NEWRUN="$NEWROOT/run"
else
@@ -388,30 +412,18 @@ else
if [ -d /run/udev/data -o -d /run/udev/db ]; then
mkdir -p -m 0755 /dev/.udev
cd /run/udev
- cp -a -t /dev/.udev .
+ cp -a . /dev/.udev
cd /
rm -rf /run/udev
fi
fi
-mount --move "$RUNDIR" "$NEWRUN"
+# if we earlier moved away from IMGDIR, go back to it - or we lose access to
+# binaries briefly
+[ -n "$PREFIX" ] && ln -sfn "${IMGDIR#/}" "$IMGLNK"
ln -sfn "${NEWRUN#/}" /run
-
-if [ -n "$PREFIX" ]; then
- if [ -d "$NEWRUN/$PREFIX" ]; then
- [ -n "$PREFIX_MNT" ] &&
- warn "'$NEWRUN/$PREFIX' already exists, dracut files will be
copied directly to this directory"
- unset PREFIX_MNT
- else
- mkdir -p -m 0755 "$NEWRUN/$PREFIX"
- fi
- if [ -n "$PREFIX_MNT" ]; then
- mount -t tmpfs -o mode=0755,nosuid,nodev,exec tmpfs "$NEWRUN/$PREFIX"
- fi
- cd "$IMGDIR"
- cp -a -t "$NEWRUN/$PREFIX" .
- cd /
-fi
+mount --move "$RUNDIR" "$NEWRUN"
+[ -n "$PREFIX" ] && ln -sfn "${NEWRUN#/}/$PREFIX" "$IMGLNK"
wait_for_loginit
diff --git a/modules.d/99base/module-setup.sh b/modules.d/99base/module-setup.sh
index 4c64bca..2a59699 100755
--- a/modules.d/99base/module-setup.sh
+++ b/modules.d/99base/module-setup.sh
@@ -41,7 +41,7 @@ install() {
[ -x /lib/systemd/systemd-timestamp ] && inst
/lib/systemd/systemd-timestamp
# export certain settings to init
- for _d in newroot imgdir prefix prefix_mnt; do
+ for _d in newroot imgdir imglnk prefix prefix_mnt; do
_x=$(echo $_d | tr "a-z" "A-Z")
[ -n "$_d" ] && echo "${_x}=${!_d}" >>${initdir}/etc/dracut-init.conf
done
--
1.7.7.1
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
