Another solution could be searching in directories found at
/etc/ld.so.conf.d/*.conf or adding a new parameter. Here is a patch
which adds a new --libdirs parameter, and also a new inst_libdir_file
function which will try to expand metacharacters on each lib
directory:
inst_libdir_file "libdevmapper-event-lvm*.so"
Regards,
diff -urN dracut-018/dracut-functions.sh dracut-018.multi/dracut-functions.sh
--- dracut-018/dracut-functions.sh 2012-04-05 13:54:38.000000000 +0200
+++ dracut-018.multi/dracut-functions.sh 2012-04-10 14:58:35.949045189
+0200
@@ -677,6 +677,34 @@
done
}
+
+# inst_libdir_file [-n <pattern>] <file> [<file>...]
+# Install a <file> located on a lib directory to the initramfs image
+# -n <pattern> install non-matching files
+inst_libdir_file() {
+ if [[ "$1" == "-n" ]]; then
+ local _pattern=$1
+ shift 2
+ for _dir in $libdirs; do
+ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+ [[ "$_i" =~ $_pattern ]] || continue
+ [[ -e "$_i" ]] && dracut_install "$_i"
+ done
+ done
+ done
+ else
+ for _dir in $libdirs; do
+ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+ [[ -e "$_f" ]] && dracut_install "$_f"
+ done
+ done
+ done
+ fi
+}
+
+
# install function decompressing the target and handling symlinks
# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
#
diff -urN dracut-018/dracut.sh dracut-018.multi/dracut.sh
--- dracut-018/dracut.sh 2012-04-05 13:54:38.000000000 +0200
+++ dracut-018.multi/dracut.sh 2012-04-10 12:05:04.549845911 +0200
@@ -221,6 +221,7 @@
--filesystems) push_arg filesystems_l "$@" || shift;;
-I|--install) push_arg install_items_l "$@" || shift;;
--fwdir) push_arg fw_dir_l "$@" || shift;;
+ --libdirs) push_arg libdirs_l "$@" || shift;;
--fscks) push_arg fscks_l "$@" || shift;;
--add-fstab) push_arg add_fstab_l "$@" || shift;;
--mount) push_arg fstab_lines "$@" || shift;;
@@ -400,6 +401,13 @@
done
fi
+if (( ${#libdirs_l[@]} )); then
+ libdirs=''
+ while pop libdirs_l val; do
+ libdirs+="$val "
+ done
+fi
+
[[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l
[[ ! $stdloglvl ]] && stdloglvl=4
stdloglvl=$((stdloglvl + verbosity_mod_l))
@@ -505,14 +513,14 @@
# Detect lib paths
[[ $libdir ]] || for libdir in /lib64 /lib; do
- [[ -d $libdir ]] && break
+ [[ -d $libdir ]] && libdirs+="$libdir " && break
done || {
dfatal 'No lib directory?!!!'
exit 1
}
[[ $usrlibdir ]] || for usrlibdir in /usr/lib64 /usr/lib; do
- [[ -d $usrlibdir ]] && break
+ [[ -d $usrlibdir ]] && libdirs+="$usrlibdir " && break
done || dwarn 'No usr/lib directory!'
# This is kinda legacy -- eventually it should go away.
diff -urN dracut-018/modules.d/01fips/module-setup.sh
dracut-018.multi/modules.d/01fips/module-setup.sh
--- dracut-018/modules.d/01fips/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/01fips/module-setup.sh 2012-04-07
12:52:12.307688709 +0200
@@ -34,12 +34,11 @@
dracut_install sha512hmac rmmod insmod mount uname umount
- for _dir in "$usrlibdir" "$libdir"; do
- [[ -e $_dir/libsoftokn3.so ]] && \
- dracut_install $_dir/libsoftokn3.so $_dir/libsoftokn3.chk \
- $_dir/libfreebl3.so $_dir/libfreebl3.chk && \
- break
- done
+ inst_libdir_file libsoftokn3.so
+ inst_libdir_file libsoftokn3.so
+ inst_libdir_file libsoftokn3.chk
+ inst_libdir_file libfreebl3.so
+ inst_libdir_file libfreebl3.chk
dracut_install $usrlibdir/hmaccalc/sha512hmac.hmac
if command -v prelink >/dev/null; then
diff -urN dracut-018/modules.d/40network/module-setup.sh
dracut-018.multi/modules.d/40network/module-setup.sh
--- dracut-018/modules.d/40network/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/40network/module-setup.sh 2012-04-07
13:12:26.754623389 +0200
@@ -89,12 +89,7 @@
_arch=$(uname -m)
- for _dir in "$usrlibdir/tls/$_arch" "$usrlibdir/tls" "$usrlibdir/$_arch" \
- "$usrlibdir" "$libdir"; do
- for _i in "$_dir"/libnss_dns.so.* "$_dir"/libnss_mdns4_minimal.so.*; do
- [ -e "$_i" ] && dracut_install "$_i"
- done
- done
-
+ inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*"
+ inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
}
diff -urN dracut-018/modules.d/80cms/module-setup.sh
dracut-018.multi/modules.d/80cms/module-setup.sh
--- dracut-018/modules.d/80cms/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/80cms/module-setup.sh 2012-04-07
12:57:27.373147757 +0200
@@ -31,9 +31,7 @@
[[ -f $file ]] && inst $file
done
- for file in {"$usrlibdir","$libdir"}/gconv/*; do
- [[ -f $file ]] && inst $file
- done
+ inst_libdir_file "gconv/*"
#inst /usr/lib/locale/locale-archive
dracut_install cmsfs-fuse fusermount ulockmgr_server bash tr
insmod rmmod cat
diff -urN dracut-018/modules.d/90dm/module-setup.sh
dracut-018.multi/modules.d/90dm/module-setup.sh
--- dracut-018/modules.d/90dm/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/90dm/module-setup.sh 2012-04-07
12:58:04.319611365 +0200
@@ -22,9 +22,7 @@
type -P dmeventd >/dev/null && dracut_install dmeventd
- for _i in {"$libdir","$usrlibdir"}/libdevmapper-event.so*; do
- [ -e "$_i" ] && dracut_install "$_i"
- done
+ inst_libdir_file "libdevmapper-event.so*"
inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
diff -urN dracut-018/modules.d/90dmraid/module-setup.sh
dracut-018.multi/modules.d/90dmraid/module-setup.sh
--- dracut-018/modules.d/90dmraid/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/90dmraid/module-setup.sh 2012-04-07
12:58:44.051467745 +0200
@@ -62,9 +62,7 @@
inst_rules 64-md-raid.rules
fi
- for _i in {"$libdir","$usrlibdir"}/libdmraid-events*.so*; do
- [ -e "$_i" ] && dracut_install "$_i"
- done
+ inst_libdir_file "libdmraid-events*.so*"
inst_rules "$moddir/61-dmraid-imsm.rules"
#inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
diff -urN dracut-018/modules.d/90lvm/module-setup.sh
dracut-018.multi/modules.d/90lvm/module-setup.sh
--- dracut-018/modules.d/90lvm/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/90lvm/module-setup.sh 2012-04-07
12:59:25.728296148 +0200
@@ -60,8 +60,6 @@
inst "$moddir/lvm_scan.sh" /sbin/lvm_scan
inst_hook cmdline 30 "$moddir/parse-lvm.sh"
- for _i in {"$libdir","$usrlibdir"}/libdevmapper-event-lvm*.so; do
- [ -e "$_i" ] && dracut_install "$_i"
- done
+ inst_libdir_file "libdevmapper-event-lvm*.so"
}
diff -urN dracut-018/modules.d/90multipath/module-setup.sh
dracut-018.multi/modules.d/90multipath/module-setup.sh
--- dracut-018/modules.d/90multipath/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/90multipath/module-setup.sh 2012-04-07
13:00:34.234532192 +0200
@@ -62,11 +62,13 @@
/sbin/xdrgetprio \
/etc/xdrdevices.conf \
/etc/multipath.conf \
- /etc/multipath/* \
- "$libdir"/libmultipath* "$libdir"/multipath/*; do
+ /etc/multipath/*; do
[ -e "$_f" ] && inst "$_f"
done
+ inst_libdir_file "libmultipath*"
+ inst_libdir_file "multipath/*"
+
inst_hook pre-trigger 02 "$moddir/multipathd.sh"
inst_hook pre-pivot 02 "$moddir/multipathd-stop.sh"
inst_rules 40-multipath.rules
diff -urN dracut-018/modules.d/95nfs/module-setup.sh
dracut-018.multi/modules.d/95nfs/module-setup.sh
--- dracut-018/modules.d/95nfs/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/95nfs/module-setup.sh 2012-04-07
13:03:06.822790298 +0200
@@ -54,11 +54,7 @@
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
- for _i in {/usr,}$libdir/libnss*.so; do
- [[ -e $_i ]] || continue
- [[ "$_i" =~ $_nsslibs ]] || continue
- dracut_install "$_i"
- done
+ inst_libdir_file -n "$_nsslibs" "libnss*.so"
inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh"
diff -urN dracut-018/modules.d/95udev-rules/module-setup.sh
dracut-018.multi/modules.d/95udev-rules/module-setup.sh
--- dracut-018/modules.d/95udev-rules/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/95udev-rules/module-setup.sh 2012-04-07
13:03:50.168452719 +0200
@@ -74,8 +74,6 @@
[ -f /etc/arch-release ] && \
inst "$moddir/load-modules.sh" /lib/udev/load-modules.sh
- for _i in {"$libdir","$usrlibdir"}/libnss_files*; do
- [ -e "$_i" ] && dracut_install "$_i"
- done
+ inst_libdir_file "libnss_files*"
}
diff -urN dracut-018/modules.d/98syslog/module-setup.sh
dracut-018.multi/modules.d/98syslog/module-setup.sh
--- dracut-018/modules.d/98syslog/module-setup.sh 2012-04-05
13:54:38.000000000 +0200
+++ dracut-018.multi/modules.d/98syslog/module-setup.sh 2012-04-07
13:06:28.071361610 +0200
@@ -16,11 +16,9 @@
local _installs
if type -P rsyslogd >/dev/null; then
_installs="rsyslogd"
- for _i in {"$libdir","$usrlibdir"}/rsyslog/lmnet.so \
- {"$libdir","$usrlibdir"}/rsyslog/imklog.so \
- {"$libdir","$usrlibdir"}/rsyslog/imuxsock.so ; do
- [ -e "$_i" ] && _installs="$_installs $_i"
- done
+ inst_libdir_file rsyslog/lmnet.so
+ inst_libdir_file rsyslog/imklog.so
+ inst_libdir_file rsyslog/imuxsock.so
elif type -P syslogd >/dev/null; then
_installs="syslogd"
elif type -P syslog-ng >/dev/null; then
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
