User may specify static route for a target address which is different
than default gateway, hence static route need be added.
Now add a cmdline parameter rd.route="" and the related operation to
parse it. User can add static route by specify it in cmdline like:
rd.route="192.168.200.0/24:via:192.168.100.222:dev:ens10"
---
dracut.cmdline.7.asc | 8 ++++++++
modules.d/40network/net-lib.sh | 9 +++++++++
2 files changed, 17 insertions(+)
diff --git a/dracut.cmdline.7.asc b/dracut.cmdline.7.asc
index 10550ee..87acc54 100644
--- a/dracut.cmdline.7.asc
+++ b/dracut.cmdline.7.asc
@@ -528,6 +528,14 @@ interface name. Better name it "bootnet" or "bluesocket".
list of physical (ethernet) interfaces. Bridge without parameters assumes
bridge=br0:eth0
+**rd.route=**__<route-options>__::
+ Add static route to route table with route options which are separated by
+ underscore. Among them some are necessary, such as the destination prefix
+ of the route, the address of the nexthop route, the output device name.
+ It's like
+ rd.route=192.168.200.0/24:via:192.168.100.222:dev:ens10
+
+
NFS
~~~
**root=**\[_<server-ip>_:]__<root-dir>__[:__<nfs-options>__]::
diff --git a/modules.d/40network/net-lib.sh b/modules.d/40network/net-lib.sh
index a82f1a8..b428abb 100755
--- a/modules.d/40network/net-lib.sh
+++ b/modules.d/40network/net-lib.sh
@@ -103,6 +103,15 @@ setup_net() {
[ -e /tmp/net.$netif.resolv.conf ] && \
cp -f /tmp/net.$netif.resolv.conf /etc/resolv.conf
+ # add static route
+ local _p _r
+ for _p in $(getargs rd.route=); do
+ if strstr "$_p" "$netif"; then
+ _r=${_p//'_'/' '}
+ ip route add $_r
+ fi
+ done
+
# Handle STP Timeout: arping the default gateway.
# (or the root server, if a) it's local or b) there's no gateway.)
# Note: This assumes that if no router is present the
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
