On Wed, May 27, 2015 at 3:09 PM, Gerhard Wiesinger <li...@wiesinger.com> wrote: > On 27.05.2015 13:56, Harald Hoyer wrote: >> >> Am 27.05.2015 um 13:28 schrieb Gerhard Wiesinger: >>> >>> Hello, >>> >>> After upgrading one machine it does't boot anymore. Booting the old >>> kernel >>> works well. >>> >>> It is a RAID, LUKS, LVM setup. Find relevant details below. >>> >>> So it looks RAID assembling doesn't work any more. >>> >>> Any ideas? >>> >>> Thank you. >>> >>> Ciao, >>> Gerhard >>> >>> blkid >>> /dev/sda1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>> TYPE="linux_raid_member" >>> PARTUUID="5ec6792c-01" >>> /dev/sdb1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>> TYPE="linux_raid_member" >>> PARTUUID="1c7cffaf-01" >>> /dev/sdc1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>> TYPE="linux_raid_member" >>> PARTUUID="0079dfc3-01" >>> /dev/sdd1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>> TYPE="linux_raid_member" >>> PARTUUID="fadeaffe-01" >>> /dev/sde1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>> TYPE="linux_raid_member" >>> PARTUUID="539b5814-01" >>> /dev/sdf1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>> TYPE="linux_raid_member" >>> PARTUUID="badeaffe-01" >>> /dev/sdh1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" >>> TYPE="linux_raid_member" >>> PARTUUID="15631562-01" >>> /dev/sdg1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" >>> TYPE="linux_raid_member" >>> PARTUUID="162f0d0b-01" >>> >>> >>> blkid -o udev >>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=5ec6792c-01 >>> >>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=1c7cffaf-01 >>> >>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=0079dfc3-01 >>> >>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=fadeaffe-01 >>> >>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=539b5814-01 >>> >>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=badeaffe-01 >>> >>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534 >>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=15631562-01 >>> >>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534 >>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534 >>> ID_FS_TYPE=linux_raid_member >>> ID_FS_PARTUUID=162f0d0b-01 >>> >>> [ 2.479836] myhost systemd[1]: Device >>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0.device appeared >>> twice >>> with different sysfs paths /sys >>> >>> /devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh >>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host8/target >>> 8:0:0/8:0:0:0/block/sdg >>> [ 2.500826] myhost systemd[1]: Device >>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0\x2dpart1.device >>> appeared twice with different sysfs p >>> aths >>> >>> /sys/devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh/sdh1 >>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1. >>> 0/host8/target8:0:0/8:0:0:0/block/sdg/sdg1 >>> [ 2.632754] myhost kernel: Switched to clocksource tsc >>> [ 91.162986] myhost systemd[1]: Job dev-md0.device/start timed out. >>> [ 91.163138] myhost systemd[1]: Timed out waiting for device >>> dev-md0.device. >>> [ 91.163251] myhost systemd[1]: Dependency failed for Cryptography >>> Setup for >>> luks-md0. >>> [ 91.163360] myhost systemd[1]: Dependency failed for >>> dev-mapper-luks\x2dmd0.device. >>> [ 91.163474] myhost systemd[1]: Job dev-mapper-luks\x2dmd0.device/start >>> failed with result 'dependency'. >>> [ 91.163586] myhost systemd[1]: Dependency failed for Encrypted >>> Volumes. >>> [ 91.163694] myhost systemd[1]: Job cryptsetup.target/start failed with >>> result 'dependency'. >>> [ 91.163801] myhost systemd[1]: Job >>> systemd-cryptsetup@luks\x2dmd0.service/start failed with result >>> 'dependency'. >>> [ 91.163910] myhost systemd[1]: Job dev-md0.device/start failed with >>> result >>> 'timeout'. >>> [ 91.164021] myhost systemd[1]: Reached target System Initialization. >>> [ 91.164129] myhost systemd[1]: Starting System Initialization. >>> [ 91.164236] myhost systemd[1]: Reached target Basic System. >>> [ 91.164346] myhost systemd[1]: Starting Basic System. >>> [ 185.740238] myhost dracut-initqueue[340]: Warning: Could not boot. >>> [ 185.741266] myhost systemd[1]: Received SIGRTMIN+20 from PID 341 >>> (plymouthd). >>> [ 185.841257] myhost dracut-initqueue[340]: Warning: >>> /dev/VolGroup00/root does >>> not exist >>> [ 185.841403] myhost systemd[1]: Starting Dracut Emergency Shell... >>> [ 185.859366] myhost systemd[1]: Received SIGRTMIN+21 from PID 341 >>> (plymouthd). >>> >>> dracut:/# cat "/run/initramfs/rdsosreport.txt" >>> + cat /lib/dracut/dracut-041-10.fc22.1 >>> dracut-041-10.fc22.1 >>> + cat /proc/cmdline >>> BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro >>> quiet >>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16 >>> LANG=en_US.UTF- >>> 8 KEYTABLE=de-latin1 >> >> >> your kernel cmdline seems to be missing the raid configuration >> >> rd.md.uuid=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >> rd.md.uuid=eb295015-e20b-e133-15db-5c9130487300 >> rd.md.uuid=51e8e983-8786-b868-dbc3-87357e1a9534 >> >> ... whatever is needed to boot your system. >> >> # dracut --print-cmdline >> >> should tell you what kernel cmdline parameters are needed > > > > Thank you for the fast reply. > > # comment: 3 separate lines!!!!! (maybe a problem) > dracut --print-cmdline > rd.luks.uuid=luks-0c66fc77-a8a0-49e6-b96c-55e886a91f09 > rd.lvm.lv=VolGroup00/root > rd.lvm.lv=VolGroup00/swap > rd.md.uuid=51e8e983:8786b868:dbc38735:7e1a9534 > rd.md.uuid=56e9bde4:5cd1630d:188c22a5:4c1c8c37 > resume=/dev/mapper/VolGroup00-swap root=/dev/mapper/VolGroup00-root > rootflags=rw,relatime,data=ordered rootfstype=ext4 > > dracut --force 4.0.4-301.fc22.x86_64 > > Still no correct entry in /etc/grub2.cfg
I would be very surprised if dracut made any changes to grub.cfg. As I understand it, you either build host-specific dracut that will include this emulated command line or you have to add lines manually to your boot loader configuration. > linux16 /vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro quiet > console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16 > LANG=en_US.UTF-8 KEYTABLE=de-latin1 > > Looks like a bug to me. > > Thank you. > > Ciao, > Gerhard > > -- > To unsubscribe from this list: send the line "unsubscribe initramfs" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
