Make sure that the key is all on one line. I can't tell if it is or not based on what Google Groups might be doing to the formatting.
Sometimes cutting and pasting from a text editor/command prompt will break up the output across multiple lines. 2008/5/13 B. Brian <[EMAIL PROTECTED]>: > > I still cannot make it work. > > Following are steps I have done this time: > 1. use msysGit to generaate ssh key. > http://github.com/guides/providing-your-ssh-key > 2. save the new ssh key to my github account > 3. remove my fork branch. > 4. generate a new fork branch. > 5. download configure_insoshi_local.sh from quick setup link: > > http://sites.google.com/a/insoshi.com/insoshi-guides/Git-Guides/quick-git-setup > 6. run "sh configure_insoshi_local.sh u196598" from Git Bash command > line > > Like I said, I can download code from master branch but somehow I > cannot fetch remote branch info: > Fetching remote branch information... > Permission denied (publickey). > fatal: The remote end hung up unexpectedly > ERROR encountered fetching branches from remote u196598 > > If I try "git fetch u196598", I will get the same error. > BTW, my new ssh key is: > ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAyK10wnAzBlSes45EEbtYh3URWS/ > noCWEtQv1ua3EqzDHABqarCM+5RfiZ+V39nHp6I5R7VAL/+ > +tvqgycX7tDFVbDgoS7KlmlAJsbPx2hhJgDlY/ > HpouuEXM7WTzMOIpwm4H0Gl7xnUS1zds1yfMK6HC/8Of7g1r9J2EemwCwhVAy > +uiU8kDTeBX5Tf7DG8XQLdaJN9QnJ47tQWOiZxSD > +McuZiILJVTsLGPOAcs9F9cuR182R04BAWWkgBHtFuIy4IXlrGqMOgx/ > mFvETe3LK21huzdhRDHf8CnecT6mgiSvVixGS+M/ > e9uF0f3xV3SCXh9ql5F47ODkl6hisvmew== [EMAIL PROTECTED] > > After I save it to my account, it becomes as: > ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAyK10wnAzBlSes45EEbtYh3URWS/ > noCWEtQv1ua3EqzDHABqarCM+5RfiZ+V39nHp6I5R7VAL/+ > +tvqgycX7tDFVbDgoS7KlmlAJsbPx2hhJgDlY/ > HpouuEXM7WTzMOIpwm4H0Gl7xnUS1zds1yfMK6HC/8Of7g1r9J2EemwCwhVAy > +uiU8kDTeBX5Tf7DG8XQLdaJN9QnJ47tQWOiZxSD > +McuZiILJVTsLGPOAcs9F9cuR182R04BAWWkgBHtFuIy4IXlrGqMOgx/ > mFvETe3LK21huzdhRDHf8CnecT6mgiSvVixGS+M/ > e9uF0f3xV3SCXh9ql5F47ODkl6hisvmew== > > Also I tried to following steps from the link: http://kylecordes.com/ > When running "git clone [EMAIL PROTECTED]:u196598/insoshi.git", I will > get the same error: > Permission denied (publickey). > fatal: The remote end hung up unexpectedly > > Can somebody help me create a new/valid ssh key and email to me? my > email address is [EMAIL PROTECTED] > > Thanks, > Brian > > On May 13, 9:57 pm, "Long Nguyen" <[EMAIL PROTECTED]> wrote: > > At the moment, you only have a the local branch "master" which is > tracking > > the master branch on the offical Insoshi repository (nicknamed > "origin"). > > When you're doing the "git push", it's trying to put push up information > to > > "origin" via git://github.com/insoshi/insoshi.git. GitHub is configured > > only to allow read access via the git protocol so you're getting the > "remote > > end hung up unexpectedly" error. > > > > What's happened is that your local repository set up isn't quite > complete > > because of the ssh key issue you had (and hopefully resolved... we'll > find > > out in one second). > > > > Here's what you need to do: > > > > # Get branch information from your forked repository > > # If your ssh key isn't configured correctly, you'll get an error at > this > > point > > git fetch u196598 > > > > # Create a local branch off the forked master branch > > git branch --track u196598 u196598/master > > git checkout u196598 > > > > # Push up the new branch to your forked repository > > git push u196598 u196598:refs/heads/u196598 > > > > # Set the configuration for the local branch > > git config branch.u196598.remote u196598 > > git config branch.u196598.merge refs/heads/u196598 > > > > This completes out the remaining steps in the quick setup script. > > > > Long > > > > 2008/5/13 B. Brian <[EMAIL PROTECTED]>: > > > > > > > > > > > > > When running "git branch": > > > $ git branch > > > * master > > > > > When running "git config -l": > > > $ git config -l > > > core.symlinks=false > > > core.autocrlf=true > > > color.diff=auto > > > pack.packsizelimit=2g > > > core.repositoryformatversion=0 > > > core.filemode=false > > > core.bare=false > > > core.logallrefupdates=true > > > core.symlinks=false > > > remote.origin.url=git://github.com/insoshi/insoshi.git > > > remote.origin.fetch=+refs/heads/*:refs/remotes/origin/* > > > branch.master.remote=origin > > > branch.master.merge=refs/heads/master > > > [EMAIL PROTECTED]:u196598/insoshi.git > > > remote.u196598.fetch=refs/heads/*:refs/remotes/u196598/* > > > > > From the doc, "git push" will save my local changes to my own fork > > > branch. So I made some changes in my local pc copy. I can see the > > > differences using "git diff". But when using "git push", I got the > > > error. I just want to test "git push" to see it works or not. > > > > > Thanks, > > > Brian > > > > > On May 13, 2:02 am, "Long Nguyen" <[EMAIL PROTECTED]> wrote: > > > > Can you run 'git branch' and 'git config -l'? I need to see which > branch > > > > you're on and where exactly you're trying to push to. > > > > > > 2008/5/12 B. Brian <[EMAIL PROTECTED]>: > > > > > > > Thank you Long for your quick/useful response. > > > > > > > So far I can do "git diff", "git pull" -- I got "Already > up-to-date." > > > > > response when executing it because I created my local branch on > 05/11 > > > > > but the last committed change made by Michael was on 05/10. Hope I > can > > > > > get updates in the future without any issues. > > > > > > > But I still cannot run "git push". I got following error: "fatal: > The > > > > > remote end hung up unexpectedly". It is ok now because I do not > have > > > > > any change to forked repository. Or I can put everything to my own > > > > > Subversion instead. > > > > > > > Brian > > > > > > > On May 12, 12:42 pm, "Long Nguyen" <[EMAIL PROTECTED]> > wrote: > > > > > > I haven't used PuTTY to set up an ssh keypair before. But it > looks > > > like > > > > > it > > > > > > might store/display the key in a format that's different than > the > > > > > > ssh-keygen. > > > > > > > > Did you cut and paste something that looks similar to the Linux > Step > > > 3 > > > > > > id_rsa.pub file on GitHub's Providing your SSH Key > > > > > > guide<http://github.com/guides/providing-your-ssh-key>? > > > > > > If not, then you'll need to take a look at Sec 8.2.10 in the > Putty > > > docs > > > > >http://the.earth.li/~sgtatham/putty/0.60/htmldoc/Chapter8.html#pubkey<http://the.earth.li/%7Esgtatham/putty/0.60/htmldoc/Chapter8.html#pubkey> > .<http://the.earth.li/%7Esgtatham/putty/0.60/htmldoc/Chapter8.html#pubkey > .> > > > .< > http://the.earth.li/%7Esgtatham/putty/0.60/htmldoc/Chapter8.html#pubkey. > > > .> > > > > > .< > > >http://the.earth.li/%7Esgtatham/putty/0.60/htmldoc/Chapter8.html#pubk.. > > > > > .> > > > > > > > > This will tell you how to get PuTTY to display the key in the > > > > > > authorized_keys format that GitHub is probably expecting. > > > > > > > > Also, "check out" and "check in" mean different things in Git > than > > > > > you're > > > > > > expecting. What you really want are "git pull" to get changes > from > > > > > remote > > > > > > repositories (updates from the official Insoshi public > repository) > > > and > > > > > "git > > > > > > push" to move updates to your forked repository. > > > > > > > > Take a look at our Git Guides < > http://docs.insoshi.com/Git-Guides> > > > to > > > > > get > > > > > > started. > > > > > > > > 2008/5/11 B. Brian <[EMAIL PROTECTED]>: > > > > > > > > > My OS is Windows XP professional. > > > > > > > > > When following the steps from the following link: > > > > >http://sites.google.com/a/insoshi.com/insoshi-guides/Git-Guides/quick. > > > > > .. > > > > > > > > > I got following error: > > > > > > > [EMAIL PROTECTED] /c/just4fun > > > > > > > $ sh configure_insoshi_local.sh u196598 > > > > > > > Cloning official insoshi repository... > > > > > > > Initialized empty Git repository in c:/just4fun/insoshi/.git/ > > > > > > > remote: Generating pack...←[K > > > > > > > remote: Done counting 9353 objects.←[K > > > > > > > remote: Deltifying 9353 objects...←[K > > > > > > > remote: 100% (9353/9353) done←[K > > > > > > > remote: Total 9353 (delta 5153), reused 9353 (delta 5153)←[K > > > > > > > Receiving objects: 100% (9353/9353), 6.66 MiB | 77 KiB/s, > done. > > > > > > > Resolving deltas: 100% (5153/5153), done. > > > > > > > Checking out files: 100% (2185/2185), done. > > > > > > > > > Adding remote connection to forked repository... > > > > > > > > > Fetching remote branch information... > > > > > > > Permission denied (publickey). > > > > > > > fatal: The remote end hung up unexpectedly > > > > > > > ERROR encountered fetching branches from remote u196598 > > > > > > > > > [EMAIL PROTECTED] /c/just4fun > > > > > > > $ > > > > > > > > > Looks like the publickey is the problem. I used puttygen to > > > generate > > > > > > > the key. The instruction steps can be found from the link: > > > > > > >http://github.com/guides/providing-your-ssh-key > > > > > > > > > Anyway, I followed the steps from the link: > > > > > > >http://github.com/u196598/insoshi/tree/master > > > > > > > to run the app on my on laptop. After installing necessary > > > libraries > > > > > > > and gems and configuring MySQL database, I did following steps > > > without > > > > > > > ANY errors: > > > > > > > > > rake install > > > > > > > rake db:test:prepare > > > > > > > rake spec > > > > > > > rake db:sample_data:reload > > > > > > > ruby script/server > > > > > > > > > The app is running fine on my pc without any issues. > > > > > > > > > My questions are: > > > > > > > 1. Is my publickey not right? If not right, what is the right > way > > > to > > > > > > > generate it? > > > > > > > > > 2. Is my Git environment not right? > > > > > > > I got git info from the following link: > > > > >http://code.google.com/p/msysgit/ > > > > > > > and installed git by running Git-1.5.5-preview20080413.exe > file. > > > > > > > > > 3. What are exact Git commands under Windows XP to do check > out > > > and > > > > > > > check in? These are two most important things for me now: > check > > > out so > > > > > > > I can get the latest updates from the repository; check in so > I > > > can > > > > > > > save my changes to the repository. > > > > > > > > > Thanks a lot for your help! > > > > > > > > > Brian > > > > > > > > -- > > > > > > Long Nguyen > > > > > > [EMAIL PROTECTED] > > > > > > -- > > > > Long Nguyen > > > > [EMAIL PROTECTED] > > > > -- > > Long Nguyen > > [EMAIL PROTECTED] > > > -- Long Nguyen [EMAIL PROTECTED] --~--~---------~--~----~------------~-------~--~----~ Insoshi developer site: http://dogfood.insoshi.com/ Insoshi documentation: http://docs.insoshi.com/ You received this message because you are subscribed to the Google Groups "Insoshi" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/insoshi?hl=en -~----------~----~----~----~------~----~------~--~---
