Cut and pasted from the serial console:
ok reset-all
Resetting ...
Sun Blade 100 (UltraSPARC-IIe), No Keyboard
OpenBoot 4.0, 2048 MB memory installed, Serial #50640332.
Ethernet address 0:3:ba:4:b5:cc, Host ID: 8304b5cc.
ok probe-ide
Device 0 ( Primary Master )
Removable ATAPI Model: LTN485S
Device 1 ( Primary Slave )
Not Present
Device 2 ( Secondary Master )
Not Present
Device 3 ( Secondary Slave )
Not Present
ok show-disks
a) /pci at 1f,0/ide at d/cdrom
b) /pci at 1f,0/ide at d/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci at 1f,0/ide at d/cdrom has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci at 1f,0/ide at d/cdrom
ok boot cdrom
Boot device: /pci at 1f,0/ide at d/cdrom at 1,0:f File and args:
Can't read disk label.
Can't open disk label package
Can't open boot device
ok boot /pci at 1f,0/ide at d/cdrom at 0,0:f
Boot device: /pci at 1f,0/ide at d/cdrom at 0,0:f File and args:
Can't read disk label.
Can't open disk label package
Can't open boot device
ok boot /pci at 1f,0/ide at d/cdrom at 2,0:f
Boot device: /pci at 1f,0/ide at d/cdrom at 2,0:f File and args:
Can't open boot device
ok boot /pci at 1f,0/ide at d/cdrom at 3,0:f
Boot device: /pci at 1f,0/ide at d/cdrom at 3,0:f File and args:
Can't open boot device
What should the Primary Master IDE CDROM be??
-Kyle
This message posted from opensolaris.org
