thanks for the hint, i had tested the "-m" option for seperate zoneroots with
u4 beta and now i think it works in u4 final, thanks.
the whole process ended successful, but i get a message "/usr/lib/lu/lucreate:
/dev/md/dsk/d40: cannot execute".
i think have seen the cpio for the zoneroot runs twice, i must do antoher test
to confirm this.
lucreate -c sol10u3 -n sol10u4 -m /:/dev/md/dsk/d40:ufs -m
/var:/dev/md/dsk/d50:ufs \
>-m /zones/test01:/dev/md/dsk/d107:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
No name for current boot environment.
Current boot environment is named <sol10u3>.
Creating initial configuration for primary boot environment <sol10u3>.
WARNING: The device </dev/md/dsk/d10> for the root file system mount point </>
is not a physical device.
WARNING: The system boot prom identifies the physical device
</dev/dsk/c1t0d0s0> as the system boot device.
Is the physical device </dev/dsk/c1t0d0s0> the boot device for the logical
device </dev/md/dsk/d10>? (yes or no) yes
INFORMATION: Assuming the boot device </dev/dsk/c1t0d0s0> obtained from the
system boot prom is the physical boot device for logical device
</dev/md/dsk/d10>.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment;
cannot get BE ID.
PBE configuration successful: PBE name <sol10u3> PBE Boot Device
</dev/dsk/c1t0d0s0>.
Comparing source boot environment <sol10u3> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
/usr/lib/lu/lucreate: /dev/md/dsk/d40: cannot execute
Updating system configuration files.
The device </dev/dsk/c1t0d0s4> is not a root device for any boot environment;
cannot get BE ID.
Creating configuration for boot environment <sol10u4>.
Source boot environment is <sol10u3>.
Creating boot environment <sol10u4>.
Creating file systems on boot environment <sol10u4>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d40>.
Creating <ufs> file system for </var> in zone <global> on </dev/md/dsk/d50>.
Creating <ufs> file system for </zones/test01> in zone <global> on
</dev/md/dsk/d107>.
Mounting file systems for boot environment <sol10u4>.
Calculating required sizes of file systems for boot environment <sol10u4>.
Populating file systems on boot environment <sol10u4>.
Checking selection integrity.
Integrity check OK.
Populating contents of mount point </>.
Populating contents of mount point </var>.
Populating contents of mount point </zones/test01>.
Copying.
Creating shared file system mount points.
Copying root of zone <test01>.
Creating compare databases for boot environment <sol10u4>.
Creating compare database for file system </var>.
Creating compare database for file system </>.
Updating compare databases on boot environment <sol10u4>.
Making boot environment <sol10u4> bootable.
Setting root slice to Solaris Volume Manager metadevice </dev/md/dsk/d40>.
Population of boot environment <sol10u4> successful.
Creation of boot environment <sol10u4> successful.
This message posted from opensolaris.org
