On 5/14/07, Pekka Savola <[EMAIL PROTECTED]> wrote:

On Mon, 14 May 2007, Alia Atlas wrote:
> In general, I find the specification having features that I don't see
>>  necessary. Reporting ifIndex is not necessary (and the index is not
>>  very useful as is to a human) if ifName is reported.  Addresses are
>>  already known from the source address though somewhat less reliably so
>>  those need not be reported for outgoing interface use, and could also
>>  result in reporting IPv6 link-local addresses (or IPv4 private
>>  addresses) which wouldn't necessarily be useful or desired.
>
> The idea with reporting the ifIndex is to provide the easy ability
> to correlate that to MIB data.  It is a common look-up key and I
> believe it to be useful.
>
> Using simply the source address doesn't handle topologies with
> parallel links between routers.  In that case, knowing the exact
> outgoing link for troubleshooting is useful. ...

(A potentially interesting note: at least one implementation has an
internal 'interface index' which is different from 'SNMP ifIndex'.
The intent should be clear in the spec.)


Do you have improved phrasing you might suggest?

If ifName is reported, is there significant benefit in reporting
ifIndex as well?

It could be more easily used for correlation, but that's only useful
for the operators of the network who could know the ifIndexes on the
routers, not outsiders.  On the other hand, those network operators
can very well map the ifName to ifIndex using SNMP or similar tools as
well.


True -  I guess some of it depends whether the name or ifIndex is more
private
and how many steps an operator has to take to get decent results.
On the other hand, normal traceroute gives both the IP address and the DNS
name, if any.  I was looking to provide the equivalent.

I'm not strongly against being able to report ifIndex (but I'd rather
that it doesn't get reported by default, at least to everyone), but it
seems like a feature that's more likely to clutter the traceroute
output with little added value: ifName should already provide the same
benefits and is a more generic mechanism.


All of the additional info is optional and an operator could determine what
to show based upon the incoming IP address or such.

Again, I was going for duplicating the information provided if an IP address
existed.

Alia
_______________________________________________
Int-area mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/int-area

Reply via email to