On Sat, Aug 10, 2019 at 12:02:19AM +0530, Anshuman Gupta wrote:
> We need to have a S/W flag based upon which driver can switch to DC3CO.
> If it is only edp display connected and it has psr2 capability,
> then set a prefer_dc3co flag to true, which will be used to
> switch to dc3co as well as to program DC3CO PSR2 transcoder
> early exitline event.
> 
> Cc: Jani Nikula <jani.nik...@intel.com>
> Cc: Imre Deak <imre.d...@intel.com>
> Cc: Animesh Manna <animesh.ma...@intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gu...@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c  |   5 +
>  .../drm/i915/display/intel_display_power.c    | 105 ++++++++++++++++++
>  .../drm/i915/display/intel_display_power.h    |   5 +
>  drivers/gpu/drm/i915/i915_drv.h               |   1 +
>  drivers/gpu/drm/i915/intel_pm.c               |   2 +-
>  drivers/gpu/drm/i915/intel_pm.h               |   2 +
>  6 files changed, 119 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c 
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 647f49ca86ff..1ec204c14a10 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -6448,6 +6448,9 @@ static void haswell_crtc_enable(struct intel_crtc_state 
> *pipe_config,
>  
>       if (WARN_ON(intel_crtc->active))
>               return;
> +     /* Enable PSR2 transcoder exit line */
> +     if (pipe_config->has_psr2 && dev_priv->csr.prefer_dc3co)
> +             tgl_enable_psr2_transcoder_exitline(pipe_config);
>  
>       intel_encoders_pre_pll_enable(intel_crtc, pipe_config, state);
>  
> @@ -13685,6 +13688,8 @@ static int intel_atomic_check(struct drm_device *dev,
>                                      "[modeset]" : "[fastset]");
>       }
>  
> +     tgl_prefer_dc3co_over_dc5_check(dev_priv, state);
> +
>       return 0;
>  
>   fail:
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c 
> b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 167839060154..04a02c88ff93 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -18,6 +18,7 @@
>  #include "intel_hotplug.h"
>  #include "intel_sideband.h"
>  #include "intel_tc.h"
> +#include "intel_pm.h"
>  
>  bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
>                                        enum i915_power_well_id power_well_id);
> @@ -791,6 +792,110 @@ static void gen9_set_dc_state(struct drm_i915_private 
> *dev_priv, u32 state)
>       dev_priv->csr.dc_state = val & mask;
>  }
>  
> +void tgl_enable_psr2_transcoder_exitline(struct intel_crtc_state  *cstate)
> +{
> +     u32 linetime_us, val, exit_scanlines;
> +     u32 crtc_vdisplay = cstate->base.adjusted_mode.crtc_vdisplay;
> +     struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
> +
> +     if (WARN_ON(cstate->cpu_transcoder != TRANSCODER_A))
> +             return;
> +
> +     linetime_us = fixed16_to_u32_round_up(intel_get_linetime_us(cstate));
> +     if (WARN_ON(!linetime_us))
> +             return;
> +     /*
> +      * DC3CO Exit time 200us B.Spec 49196
> +      * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1
> +      * Exit line event need to program above calculated scan lines before
> +      * next VBLANK.
> +      */
> +     exit_scanlines = DIV_ROUND_UP(200, linetime_us) + 1;
> +     if (WARN_ON(exit_scanlines > crtc_vdisplay))
> +             return;
> +
> +     exit_scanlines = crtc_vdisplay - exit_scanlines;
> +     exit_scanlines <<= EXITLINE_SHIFT;
> +     val = I915_READ(EXITLINE(cstate->cpu_transcoder));
> +     val &= ~(EXITLINE_MASK | EXITLINE_ENABLE);
> +     val |= exit_scanlines;
> +     val |= EXITLINE_ENABLE;
> +     I915_WRITE(EXITLINE(cstate->cpu_transcoder), val);
> +}
> +
> +static bool tgl_is_only_edp_connected(struct intel_crtc_state  *crtc_state)
> +{
> +     struct drm_atomic_state *state = crtc_state->base.state;
> +     struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +     struct drm_connector *connector, *edp_connector = NULL;
> +     struct drm_connector_state *connector_state;
> +     int i;
> +
> +     for_each_new_connector_in_state(state, connector, connector_state, i) {
> +             if (connector_state->crtc != &crtc->base)
> +                     continue;
> +
> +             if (connector->status == connector_status_connected &&
> +                 connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> +                     return false;
> +             else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP &&
> +                      connector->status == connector_status_connected)
> +                     edp_connector = connector;
> +     }
> +
> +     if (edp_connector)
> +             return true;
> +
> +     return false;
> +}
> +
> +/*
> + * tgl_prefer_dc3co_over_dc5_check check whether it is worth to choose
> + * DC3CO over DC5. Currently it just check crtc psr2 capebilty and only
> + * edp display should be connected.
> + * TODO: Prefer DC3CO over DC5 only in video playback.
> + */
> +void tgl_prefer_dc3co_over_dc5_check(struct drm_i915_private *dev_priv,
> +                                  struct intel_atomic_state *state)

One more thing here: this function will set prefer_dc3co if there is
only a PSR2 eDP output connected. However DC states will be disabled
whenever an external display is connected, so I wonder if we could just
depend on that and allow DC3CO (instead of the default DC5/6 state) from
the PSR2 enabling/disabling and page flip/idle thread functions.

> +{
> +     struct intel_crtc_state *crtc_state, *mode_changed_cstate;
> +     struct intel_crtc *crtc;
> +     int i;
> +     u32 val;
> +
> +     dev_priv->csr.prefer_dc3co = false;
> +
> +     if (!IS_TIGERLAKE(dev_priv))
> +             return;
> +
> +     if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
> +             return;
> +
> +     for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
> +             if (crtc->pipe == PIPE_A)
> +                     mode_changed_cstate = crtc_state;
> +             if (!crtc_state->has_psr2 && crtc_state->base.active) {
> +                     dev_priv->csr.prefer_dc3co = false;
> +                     return;
> +             } else if (crtc_state->has_psr2) {
> +                     if (tgl_is_only_edp_connected(crtc_state) &&
> +                         crtc_state->base.active) {
> +                             dev_priv->csr.prefer_dc3co = true;
> +                             continue;
> +                     } else {
> +                             dev_priv->csr.prefer_dc3co = false;
> +                             return;
> +                     }
> +             }
> +     }
> +
> +     if (dev_priv->csr.prefer_dc3co) {
> +             val = I915_READ(EXITLINE(mode_changed_cstate->cpu_transcoder));
> +             if (!(val & EXITLINE_ENABLE))
> +                     mode_changed_cstate->base.mode_changed = true;
> +     }
> +}
> +
>  static void tgl_allow_dc3co(struct drm_i915_private *dev_priv)
>  {
>       gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h 
> b/drivers/gpu/drm/i915/display/intel_display_power.h
> index 97f2562fc5d3..46e1bcfa490a 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.h
> @@ -12,6 +12,8 @@
>  
>  struct drm_i915_private;
>  struct intel_encoder;
> +struct intel_crtc_state;
> +struct intel_atomic_state;
>  
>  enum intel_display_power_domain {
>       POWER_DOMAIN_DISPLAY_CORE,
> @@ -246,6 +248,9 @@ void intel_display_power_suspend_late(struct 
> drm_i915_private *i915);
>  void intel_display_power_resume_early(struct drm_i915_private *i915);
>  void intel_display_power_suspend(struct drm_i915_private *i915);
>  void intel_display_power_resume(struct drm_i915_private *i915);
> +void tgl_prefer_dc3co_over_dc5_check(struct drm_i915_private *dev_priv,
> +                                  struct intel_atomic_state *state);
> +void tgl_enable_psr2_transcoder_exitline(struct intel_crtc_state  *cstate);
>  
>  const char *
>  intel_display_power_domain_str(struct drm_i915_private *i915,
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 3cdb5bf489f2..7ca0703209a4 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -332,6 +332,7 @@ struct intel_csr {
>       u32 dc_state;
>       u32 allowed_dc_mask;
>       intel_wakeref_t wakeref;
> +     bool prefer_dc3co;
>  };
>  
>  enum i915_cache_level {
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 780df8db2eba..634e43219164 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4584,7 +4584,7 @@ skl_wm_method2(u32 pixel_rate, u32 pipe_htotal, u32 
> latency,
>       return ret;
>  }
>  
> -static uint_fixed_16_16_t
> +uint_fixed_16_16_t
>  intel_get_linetime_us(const struct intel_crtc_state *crtc_state)
>  {
>       u32 pixel_rate;
> diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
> index e3573e1e16e3..454e92c06dff 100644
> --- a/drivers/gpu/drm/i915/intel_pm.h
> +++ b/drivers/gpu/drm/i915/intel_pm.h
> @@ -8,6 +8,7 @@
>  
>  #include <linux/types.h>
>  
> +#include "i915_drv.h"
>  #include "i915_reg.h"
>  
>  struct drm_device;
> @@ -76,6 +77,7 @@ u64 intel_rc6_residency_ns(struct drm_i915_private 
> *dev_priv, i915_reg_t reg);
>  u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv, i915_reg_t 
> reg);
>  
>  u32 intel_get_cagf(struct drm_i915_private *dev_priv, u32 rpstat1);
> +uint_fixed_16_16_t intel_get_linetime_us(const struct intel_crtc_state 
> *cstate);
>  
>  unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
>  unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
> -- 
> 2.21.0
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to