On Mon, Oct 9, 2023, at 18:33, Jesse Brandeburg wrote: > On 10/4/2023 10:08 AM, Skyler Mäntysaari wrote: >>>> Hi there, >>>> >>>> It seems that for reasons unknown to me, my Intel X533 based 10G SFP+ >>>> doesn't want to work with kernel 6.1.55 in VyOS 1.4 nor Debian 12 but >>>> it does in OPNsense which is based on FreeBSD 13.2. >>>> >>>> How would I go about debugging this properly? Both sides see light, >>>> but no link unless I'm using FreeBSD. >> https://forum.vyos.io/t/10g-sfp-trouble-with-linking-intel-x553/12253/11?u=samip537 > > Hi Skyler, > > Response from Intel team: > > In the ethtool -m output pasted I see TX and RX optical power is fine. > Could you request fault status on both sides? Just want to check if link > is down because we are at local-fault or link partner is at local-fault. > > rmmod ixgbe > modprobe ixgbe > ethtool -S eth0 | grep fault > > Since it is 10G, if our side TX is ON (power level says it is) then we > should expect link partner RX to be locked so cannot be at Local Fault. > > Skyler, please gather that ethtool -S data for us. > > Jesse > > > >
Hi Jesse, As the other side of the link is an Juniper, I'm not quite sure how I would gather the same data from it as it doesn't have ethtool? I have also somewhat given up hope on it working on VyOS and instead I am using OPNsense for the moment but I still have VyOS installed as well. Skyler _______________________________________________ Intel-wired-lan mailing list [email protected] https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
