For more than 15 years this code has passed in a request for a page and
masked off that page when read/writing. This code has been here forever,
but FIELD_PREP finds the bug when converted to use it. Change the code
to do exactly the same thing but allow the conversion to FIELD_PREP in a
later patch. To make it clear what we lost when making this change I
left a comment, but there is no point to change the code to generate a
correct sequence at this point.

This is not a Fixes tagged patch on purpose because it doesn't change
the binary output.

Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
---
 drivers/net/ethernet/intel/e1000e/80003es2lan.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c 
b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index be9c695dde12..74671201208e 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1035,17 +1035,18 @@ static s32 e1000_setup_copper_link_80003es2lan(struct 
e1000_hw *hw)
         * iteration and increase the max iterations when
         * polling the phy; this fixes erroneous timeouts at 10Mbps.
         */
-       ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
-                                                  0xFFFF);
+       /* these next three accesses were always meant to use page 0x34 using
+        * GG82563_REG(0x34, N) but never did, so we've just corrected the call
+        * to not drop bits
+        */
+       ret_val = e1000_write_kmrn_reg_80003es2lan(hw, 4, 0xFFFF);
        if (ret_val)
                return ret_val;
-       ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
-                                                 &reg_data);
+       ret_val = e1000_read_kmrn_reg_80003es2lan(hw, 9, &reg_data);
        if (ret_val)
                return ret_val;
        reg_data |= 0x3F;
-       ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
-                                                  reg_data);
+       ret_val = e1000_write_kmrn_reg_80003es2lan(hw, 9, reg_data);
        if (ret_val)
                return ret_val;
        ret_val =
-- 
2.39.3

_______________________________________________
Intel-wired-lan mailing list
[email protected]
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

Reply via email to