On 1/24/2024 7:21 AM, Lukasz Plachno wrote:
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding. From: Jakub Buchocki <[email protected]> Add support for 'flow-type ether' Flow Director rules via ethtool. Rules not containing masks are processed by the Flow Director, and support the following set of input parameters in all combinations: src, dst, proto, vlan-etype, vlan, action. It is possible to specify address mask in ethtool parameters but only 00:00:00:00:00 and FF:FF:FF:FF:FF are valid. The same applies to proto, vlan-etype and vlan masks: only 0x0000 and 0xffff masks are valid. Signed-off-by: Jakub Buchocki <[email protected]> Co-developed-by: Mateusz Pacuszka <[email protected]> Signed-off-by: Mateusz Pacuszka <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Lukasz Plachno <[email protected]> --- .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 140 +++++++++++++++++- drivers/net/ethernet/intel/ice/ice_fdir.c | 27 ++++ drivers/net/ethernet/intel/ice/ice_fdir.h | 11 ++ drivers/net/ethernet/intel/ice/ice_type.h | 1 + 4 files changed, 178 insertions(+), 1 deletion(-)
FWIW, Seems okay to me. Thanks for adding the warning prints. Reviewed-by: Brett Creeley <[email protected]> [...]
