On Tue, Feb 13, 2024 at 10:03:05AM +0100, Jiri Pirko wrote:
> Tue, Feb 13, 2024 at 08:35:03AM CET, [email protected] wrote:
> >Use generic devlink PF MSI-X parameter to allow user to change MSI-X
> >range.
> >
> >Reviewed-by: Wojciech Drewek <[email protected]>
> >Signed-off-by: Michal Swiatkowski <[email protected]>
> >---
> > drivers/net/ethernet/intel/ice/ice.h         |  8 ++
> > drivers/net/ethernet/intel/ice/ice_devlink.c | 82 ++++++++++++++++++++
> > drivers/net/ethernet/intel/ice/ice_irq.c     |  6 ++
> > 3 files changed, 96 insertions(+)
> >
> >diff --git a/drivers/net/ethernet/intel/ice/ice.h 
> >b/drivers/net/ethernet/intel/ice/ice.h
> >index c4127d5f2be3..24085f3c0966 100644
> >--- a/drivers/net/ethernet/intel/ice/ice.h
> >+++ b/drivers/net/ethernet/intel/ice/ice.h
> >@@ -94,6 +94,7 @@
> > #define ICE_MIN_LAN_TXRX_MSIX       1
> > #define ICE_MIN_LAN_OICR_MSIX       1
> > #define ICE_MIN_MSIX                (ICE_MIN_LAN_TXRX_MSIX + 
> > ICE_MIN_LAN_OICR_MSIX)
> >+#define ICE_MAX_MSIX                256
> > #define ICE_FDIR_MSIX               2
> > #define ICE_RDMA_NUM_AEQ_MSIX       4
> > #define ICE_MIN_RDMA_MSIX   2
> >@@ -535,6 +536,12 @@ struct ice_agg_node {
> >     u8 valid;
> > };
> > 
> >+struct ice_pf_msix {
> >+    u16 cur;
> >+    u16 min;
> >+    u16 max;
> >+};
> >+
> > struct ice_pf {
> >     struct pci_dev *pdev;
> > 
> >@@ -604,6 +611,7 @@ struct ice_pf {
> >     struct msi_map ll_ts_irq;       /* LL_TS interrupt MSIX vector */
> >     u16 max_pf_txqs;        /* Total Tx queues PF wide */
> >     u16 max_pf_rxqs;        /* Total Rx queues PF wide */
> >+    struct ice_pf_msix msix;
> >     u16 num_lan_msix;       /* Total MSIX vectors for base driver */
> >     u16 num_lan_tx;         /* num LAN Tx queues setup */
> >     u16 num_lan_rx;         /* num LAN Rx queues setup */
> >diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c 
> >b/drivers/net/ethernet/intel/ice/ice_devlink.c
> >index cc717175178b..b82ff9556a4b 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_devlink.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
> >@@ -1603,6 +1603,78 @@ enum ice_param_id {
> >     ICE_DEVLINK_PARAM_ID_LOOPBACK,
> > };
> > 
> >+static int
> >+ice_devlink_msix_max_pf_get(struct devlink *devlink, u32 id,
> >+                        struct devlink_param_gset_ctx *ctx)
> >+{
> >+    struct ice_pf *pf = devlink_priv(devlink);
> >+
> >+    ctx->val.vu16 = pf->msix.max;
> >+
> >+    return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_max_pf_set(struct devlink *devlink, u32 id,
> >+                        struct devlink_param_gset_ctx *ctx)
> >+{
> >+    struct ice_pf *pf = devlink_priv(devlink);
> >+    u16 max = ctx->val.vu16;
> >+
> >+    pf->msix.max = max;
> 
> What's permanent about this exactly?
> 

I want to store the value here after driver reinit. Isn't it enough to
use this parameter type? Which one should be used for this purpose?

> 
> >+
> >+    return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
> >+                             union devlink_param_value val,
> >+                             struct netlink_ext_ack *extack)
> >+{
> >+    if (val.vu16 > ICE_MAX_MSIX) {
> >+            NL_SET_ERR_MSG_MOD(extack, "PF max MSI-X is too high");
> >+            return -EINVAL;
> >+    }
> >+
> >+    return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_get(struct devlink *devlink, u32 id,
> >+                        struct devlink_param_gset_ctx *ctx)
> >+{
> >+    struct ice_pf *pf = devlink_priv(devlink);
> >+
> >+    ctx->val.vu16 = pf->msix.min;
> >+
> >+    return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_set(struct devlink *devlink, u32 id,
> >+                        struct devlink_param_gset_ctx *ctx)
> >+{
> >+    struct ice_pf *pf = devlink_priv(devlink);
> >+    u16 min = ctx->val.vu16;
> >+
> >+    pf->msix.min = min;
> 
> What's permanent about this exactly?
>

The same as with max.

> 
> >+
> >+    return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
> >+                             union devlink_param_value val,
> >+                             struct netlink_ext_ack *extack)
> >+{
> >+    if (val.vu16 <= ICE_MIN_MSIX) {
> >+            NL_SET_ERR_MSG_MOD(extack, "PF min MSI-X is too low");
> >+            return -EINVAL;
> >+    }
> >+
> >+    return 0;
> >+}
> >+
> > static const struct devlink_param ice_devlink_params[] = {
> >     DEVLINK_PARAM_GENERIC(ENABLE_ROCE, BIT(DEVLINK_PARAM_CMODE_RUNTIME),
> >                           ice_devlink_enable_roce_get,
> >@@ -1618,6 +1690,16 @@ static const struct devlink_param 
> >ice_devlink_params[] = {
> >                          ice_devlink_loopback_get,
> >                          ice_devlink_loopback_set,
> >                          ice_devlink_loopback_validate),
> >+    DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
> >+                          BIT(DEVLINK_PARAM_CMODE_PERMANENT),
> >+                          ice_devlink_msix_max_pf_get,
> >+                          ice_devlink_msix_max_pf_set,
> >+                          ice_devlink_msix_max_pf_validate),
> >+    DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
> >+                          BIT(DEVLINK_PARAM_CMODE_PERMANENT),
> 
> ....
> 
> 
> pw-bot: cr
> 
> 
> >+                          ice_devlink_msix_min_pf_get,
> >+                          ice_devlink_msix_min_pf_set,
> >+                          ice_devlink_msix_min_pf_validate),
> > };
> > 
> > static void ice_devlink_free(void *devlink_ptr)
> >diff --git a/drivers/net/ethernet/intel/ice/ice_irq.c 
> >b/drivers/net/ethernet/intel/ice/ice_irq.c
> >index ad82ff7d1995..fa7178a68b94 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_irq.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_irq.c
> >@@ -254,6 +254,12 @@ int ice_init_interrupt_scheme(struct ice_pf *pf)
> >     int total_vectors = pf->hw.func_caps.common_cap.num_msix_vectors;
> >     int vectors, max_vectors;
> > 
> >+    /* load default PF MSI-X range */
> >+    if (!pf->msix.min)
> >+            pf->msix.min = ICE_MIN_MSIX;
> >+    if (!pf->msix.max)
> >+            pf->msix.max = total_vectors / 2;
> >+
> >     vectors = ice_ena_msix_range(pf);
> > 
> >     if (vectors < 0)
> >-- 
> >2.42.0
> >
> >

Reply via email to