> -----Original Message----- > From: Intel-wired-lan <[email protected]> On Behalf Of > Jacob Keller > Sent: Friday, February 16, 2024 11:07 PM > To: Nguyen, Anthony L <[email protected]>; Intel Wired LAN > <[email protected]> > Cc: Keller, Jacob E <[email protected]>; Kitszel, Przemyslaw > <[email protected]> > Subject: [Intel-wired-lan] [PATCH iwl-next 0/4] ice: use relative VSI index > for > VFs VSIs > > The ice driver currently communicates firmware VSI numbers to its virtual > functions over virtchnl. For E800 series hardware, the VF driver has no direct > use of the VSI number. > > Some older legacy hardware could use the actual VSI number when > communicating directly to firmware via the AdminQ. The E800 hardware does > not allow this, and all communication happens over mailbox to the PF. The VFs > do not have a direct access to the firmware. Additionally, none of the > registers > exposed to the VF depend on the VSI number. > > Further, the PF is able to lookup the VSI for the VF without using the number > provided by the VF over virtchnl. Thus, there is no reason that the number > provided to the VF must actually be a real VSI number, nor does it need to be > distinct across multiple VFs. > > This series modifies the ice driver to send a relative VSI number to the VF > instead of sending the firmware values. This simplifies the interface with the > VF, as the PF can simply validate this relative number. Currently, only a > single > VSI is provided to each VF. Thus, a simple static value of 1 is used. We can > easily extend this to use a proper relative index if we enable multiple VSIs > for a > VF in the future. > > First, a couple of patches cleanup a few places in the code which still use > the > VF VSI IDs. Then, the VSI ID logic over virtchnl is changed to use the static > values. Finally, the vf->lan_vsi_num field is no longer used and only set, so > we > can simplify the driver further by removing this entirely. > > This eliminates a path for leaking information about the PF state to the VF, > and > simplifies the PF driver logic. Several of the removed code flows required an > iterated scan over the VSI list to locate the VSI with the reported VSI > number. > > Finally, this has significant value for a future series implementing VF live > migration. Now that the PF always passes relative VSI indexes, migration will > no longer need to worry about migrating the absolute VSI numbers sent > previously, which will simplify both the migration process as well as > continued > handling of a migrated VF after a migration event completes. > > Jacob Keller (4): > ice: pass VSI pointer into ice_vc_isvalid_q_id > ice: remove unnecessary duplicate checks for VF VSI ID > ice: use relative VSI index for VFs instead of PF VSI number > ice: remove vf->lan_vsi_num field > > drivers/net/ethernet/intel/ice/ice_sriov.c | 1 - > drivers/net/ethernet/intel/ice/ice_vf_lib.c | 10 +----- > drivers/net/ethernet/intel/ice/ice_vf_lib.h | 5 --- > drivers/net/ethernet/intel/ice/ice_virtchnl.c | 31 +++++++------------ > drivers/net/ethernet/intel/ice/ice_virtchnl.h | 9 ++++++ > .../ethernet/intel/ice/ice_virtchnl_fdir.c | 3 -- > 6 files changed, 22 insertions(+), 37 deletions(-) > > > base-commit: 6cffde791c4f1c276fdfcf068554c3c77de35f40 > -- > 2.41.0
Tested-by: Rafal Romanowski <[email protected]>
