> -----Original Message----- > From: Intel-wired-lan <[email protected]> On Behalf Of > Erwan Velu > Sent: Tuesday, March 19, 2024 7:17 AM > Cc: Velu, Erwan <[email protected]>; [email protected]; Eric > Dumazet <[email protected]>; [email protected]; Nguyen, > Anthony L <[email protected]>; [email protected]; > Jakub Kicinski <[email protected]>; Paolo Abeni <[email protected]>; David > S. Miller <[email protected]> > Subject: [Intel-wired-lan] [PATCH iwl-net] i40e: Report MFS in decimal base > instead of hex > > If the MFS is set below the default (0x2600), a warning message is reported > like the following : > > MFS for port 1 has been set below the default: 600 > > This message is a bit confusing as the number shown here (600) is in fact an > hexa number: 0x600 = 1536 > > Without any explicit "0x" prefix, this message is read like the MFS is set to > 600 > bytes. > > MFS, as per MTUs, are usually expressed in decimal base. > > This commit reports both current and default MFS values in decimal so it's > less > confusing for end-users. > > A typical warning message looks like the following : > > MFS for port 1 (1536) has been set below the default (9728) > > Signed-off-by: Erwan Velu <[email protected]> > --- > drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-)
Tested-by: Tony Brelinski <[email protected]>
