On Wed Feb 19 2025, Joe Damato wrote:
> On Wed, Feb 19, 2025 at 08:41:01AM +0100, Kurt Kanzenbach wrote:
>> On Tue Feb 18 2025, Joe Damato wrote:
>> > On Mon, Feb 17, 2025 at 12:31:22PM +0100, Kurt Kanzenbach wrote:
>> >> Link queues to NAPI instances via netdev-genl API. This is required to use
>> >> XDP/ZC busy polling. See commit 5ef44b3cb43b ("xsk: Bring back busy
>> >> polling
>> >> support") for details.
>> >>
>> >> This also allows users to query the info with netlink:
>> >>
>> >> |$ ./tools/net/ynl/pyynl/cli.py --spec
>> >> Documentation/netlink/specs/netdev.yaml \
>> >> | --dump queue-get --json='{"ifindex": 2}'
>> >> |[{'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'rx'},
>> >> | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'rx'},
>> >> | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'rx'},
>> >> | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'rx'},
>> >> | {'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'tx'},
>> >> | {'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'tx'},
>> >> | {'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'tx'},
>> >> | {'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'tx'}]
>> >>
>> >> Add rtnl locking to PCI error handlers, because netif_queue_set_napi()
>> >> requires the lock held.
>> >>
>> >> While at __igb_open() use RCT coding style.
>> >>
>> >> Signed-off-by: Kurt Kanzenbach <[email protected]>
>> >> ---
>> >> drivers/net/ethernet/intel/igb/igb.h | 2 ++
>> >> drivers/net/ethernet/intel/igb/igb_main.c | 43
>> >> +++++++++++++++++++++++++++----
>> >> drivers/net/ethernet/intel/igb/igb_xsk.c | 2 ++
>> >> 3 files changed, 42 insertions(+), 5 deletions(-)
>> >
>> > [...]
>> >
>> >> @@ -9737,16 +9765,21 @@ static void igb_io_resume(struct pci_dev *pdev)
>> >> struct net_device *netdev = pci_get_drvdata(pdev);
>> >> struct igb_adapter *adapter = netdev_priv(netdev);
>> >>
>> >> + rtnl_lock();
>> >> if (netif_running(netdev)) {
>> >> if (!test_bit(__IGB_DOWN, &adapter->state)) {
>> >> dev_dbg(&pdev->dev, "Resuming from non-fatal error, do
>> >> nothing.\n");
>> >> + rtnl_unlock();
>> >> return;
>> >> }
>> >> +
>> >> if (igb_up(adapter)) {
>> >> dev_err(&pdev->dev, "igb_up failed after reset\n");
>> >> + rtnl_unlock();
>> >> return;
>> >> }
>> >> }
>> >> + rtnl_unlock();
>> >
>> > Does RTNL need to be held when calling netif_running()? If not, you
>> > could probably reduce the size of the section under the lock a bit?
>>
>> All the other instances in the driver guard the netif_running(), too.
>
> OK, I spent a bit of time tracing through the paths in the igb
> source. I think the v1 feedback I sent identified all the RTNL
> paths, but:
> - I am not an igb expert
> - I don't have a device to test this onIntel i210 is one of the supported cards by igb driver. These are relatively cheap (20-30 Euro/$) and easy to get hands on. > - It is certainly possible I missed a path in my v1 analysis > > The above said, as far as I can tell this patch seems fine, so: > > Acked-by: Joe Damato <[email protected]> Thanks.
signature.asc
Description: PGP signature
