> -----Original Message-----
> From: Michal Swiatkowski <[email protected]>
> Sent: Monday, March 10, 2025 11:04 PM
> To: Keller, Jacob E <[email protected]>
> Cc: Nguyen, Anthony L <[email protected]>; Kitszel, Przemyslaw
> <[email protected]>; Andrew Lunn <[email protected]>; David
> S. Miller <[email protected]>; Eric Dumazet <[email protected]>; Jakub
> Kicinski <[email protected]>; Paolo Abeni <[email protected]>; Richard Cochran
> <[email protected]>; Ruud Bos <[email protected]>; Paul Barker
> <[email protected]>; Niklas Söderlund
> <[email protected]>; Bryan Whitehead
> <[email protected]>; [email protected]; Raju
> Lakkaraju <[email protected]>; Florian Fainelli
> <[email protected]>; Broadcom internal kernel review list <bcm-
> [email protected]>; Andrew Lunn <[email protected]>; Heiner
> Kallweit <[email protected]>; Russell King <[email protected]>;
> Jonathan
> Lemon <[email protected]>; Lasse Johnsen <[email protected]>; Vadim
> Fedorenko <[email protected]>; [email protected];
> [email protected]; [email protected]
> Subject: Re: [PATCH net 1/5] igb: reject invalid external timestamp requests
> for
> 82580-based HW
>
> On Mon, Mar 10, 2025 at 03:16:36PM -0700, Jacob Keller wrote:
> > The igb_ptp_feature_enable_82580 function correctly checks that unknown
> > flags are not passed to the function. However, it does not actually check
> > PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external
> timestamp
> > function.
> >
> > The data sheet for the 82580 product says:
> >
> > Upon a change in the input level of one of the SDP pins that was
> > configured to detect Time stamp events using the TSSDP register, a time
> > stamp of the system time is captured into one of the two auxiliary time
> > stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1).
> >
> > For example to define timestamping of events in the AUXSTMPL0 and
> > AUXSTMPH0 registers, Software should:
> >
> > 1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects
> > the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1.
> >
> > 2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping
> >
> > The same paragraph is in the i350 and i354 data sheets.
> >
> > The wording implies that the time stamps are captured at any level change.
> > There does not appear to be any way to only timestamp one edge of the
> > signal.
> >
> > Reject requests which do not set both PTP_RISING_EDGE and
> PTP_FALLING_EDGE
> > when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2.
> >
> > Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350")
> > Signed-off-by: Jacob Keller <[email protected]>
> > ---
> > drivers/net/ethernet/intel/igb/igb_ptp.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c
> b/drivers/net/ethernet/intel/igb/igb_ptp.c
> > index
> f9457055612004c10f74379122063e8136fe7d76..b89ef4538a18d7ca11325ddc
> 15944a878f4d807e 100644
> > --- a/drivers/net/ethernet/intel/igb/igb_ptp.c
> > +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
> > @@ -509,6 +509,11 @@ static int igb_ptp_feature_enable_82580(struct
> ptp_clock_info *ptp,
> > PTP_STRICT_FLAGS))
> > return -EOPNOTSUPP;
> >
> > + /* Both the rising and falling edge are timstamped */
> > + if (rq->extts.flags & PTP_STRICT_FLAGS &&
> > + (rq->extts.flags & PTP_EXTTS_EDGES) != PTP_EXTTS_EDGES)
> > + return -EOPNOTSUPP;
> > +
> > if (on) {
> > pin = ptp_find_pin(igb->ptp_clock, PTP_PF_EXTTS,
> > rq->extts.index);
>
> Thanks for fixing
> Reviewed-by: Michal Swiatkowski <[email protected]>
>
> In igb_ptp_feature_enable_i210() there is the same check for both edges
> but also PTP_ENABLE_FEATURE is tested. There is no need for it here, or
> it is redundant even in i210?
This needs a v2 with the flag check modified. Will fix, thanks for spotting it!
>
> >
> > --
> > 2.48.1.397.gec9d649cc640
