From: Shahar Shitrit <shshit...@nvidia.com>

Enable configuration of the grace period delay — a time window
starting from the first error recovery, during which the reporter
allows recovery attempts for each reported error.

This feature is helpful when a single underlying issue causes
multiple errors, as it delays the start of the grace period
to allow sufficient time for recovering all related errors.
For example, if multiple TX queues time out simultaneously,
a sufficient grace period delay could allow all affected TX
queues to be recovered within that window. Without this delay,
only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once
the grace period begins.

Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx grace_period_delay 500

Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
 --spec Documentation/netlink/specs/devlink.yaml \
 --do health-reporter-set --json '{
  "bus-name": "auxiliary",
  "dev-name": "mlx5_core.eth.0",
  "port-index": 65535,
  "health-reporter-name": "tx",
  "health-reporter-graceful-period-delay": 500
}'

Signed-off-by: Shahar Shitrit <shshit...@nvidia.com>
Reviewed-by: Jiri Pirko <j...@nvidia.com>
Reviewed-by: Carolina Jubran <cjub...@nvidia.com>
Signed-off-by: Tariq Toukan <tar...@nvidia.com>
---
 Documentation/netlink/specs/devlink.yaml      |  7 +++++
 .../networking/devlink/devlink-health.rst     |  2 +-
 include/uapi/linux/devlink.h                  |  2 ++
 net/devlink/health.c                          | 30 +++++++++++++++++--
 net/devlink/netlink_gen.c                     |  5 ++--
 5 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/Documentation/netlink/specs/devlink.yaml 
b/Documentation/netlink/specs/devlink.yaml
index 1c4bb0cbe5f0..c6cc0ce18685 100644
--- a/Documentation/netlink/specs/devlink.yaml
+++ b/Documentation/netlink/specs/devlink.yaml
@@ -848,6 +848,10 @@ attribute-sets:
       -
         name: region-direct
         type: flag
+      -
+        name: health-reporter-graceful-period-delay
+        type: u64
+
       -
         name: rate-tc-bws
         type: nest
@@ -1228,6 +1232,8 @@ attribute-sets:
         name: health-reporter-dump-ts-ns
       -
         name: health-reporter-auto-dump
+      -
+        name: health-reporter-graceful-period-delay
 
   -
     name: dl-attr-stats
@@ -1965,6 +1971,7 @@ operations:
             - health-reporter-graceful-period
             - health-reporter-auto-recover
             - health-reporter-auto-dump
+            - health-reporter-graceful-period-delay
 
     -
       name: health-reporter-recover
diff --git a/Documentation/networking/devlink/devlink-health.rst 
b/Documentation/networking/devlink/devlink-health.rst
index e0b8cfed610a..07602f678282 100644
--- a/Documentation/networking/devlink/devlink-health.rst
+++ b/Documentation/networking/devlink/devlink-health.rst
@@ -50,7 +50,7 @@ Once an error is reported, devlink health will perform the 
following actions:
   * Auto recovery attempt is being done. Depends on:
 
     - Auto-recovery configuration
-    - Grace period vs. time passed since last recover
+    - Grace period (and grace period delay)  vs. time passed since last recover
 
 Devlink formatted message
 =========================
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index e72bcc239afd..42a11b7e4a70 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -634,6 +634,8 @@ enum devlink_attr {
 
        DEVLINK_ATTR_REGION_DIRECT,             /* flag */
 
+       DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY,     /* u64 */
+
        DEVLINK_ATTR_RATE_TC_BWS,               /* nested */
        DEVLINK_ATTR_RATE_TC_INDEX,             /* u8 */
        DEVLINK_ATTR_RATE_TC_BW,                /* u32 */
diff --git a/net/devlink/health.c b/net/devlink/health.c
index a0269975f592..5699779fce77 100644
--- a/net/devlink/health.c
+++ b/net/devlink/health.c
@@ -113,7 +113,9 @@ __devlink_health_reporter_create(struct devlink *devlink,
 {
        struct devlink_health_reporter *reporter;
 
-       if (WARN_ON(ops->default_graceful_period && !ops->recover))
+       if (WARN_ON(ops->default_graceful_period_delay &&
+                   !ops->default_graceful_period) ||
+           WARN_ON(ops->default_graceful_period && !ops->recover))
                return ERR_PTR(-EINVAL);
 
        reporter = kzalloc(sizeof(*reporter), GFP_KERNEL);
@@ -293,6 +295,11 @@ devlink_nl_health_reporter_fill(struct sk_buff *msg,
            devlink_nl_put_u64(msg, 
DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD,
                               reporter->graceful_period))
                goto reporter_nest_cancel;
+       if (reporter->ops->recover &&
+           devlink_nl_put_u64(msg,
+                              
DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY,
+                              reporter->graceful_period_delay))
+               goto reporter_nest_cancel;
        if (reporter->ops->recover &&
            nla_put_u8(msg, DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER,
                       reporter->auto_recover))
@@ -458,16 +465,33 @@ int devlink_nl_health_reporter_set_doit(struct sk_buff 
*skb,
 
        if (!reporter->ops->recover &&
            (info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD] ||
-            info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER]))
+            info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER] ||
+            info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY]))
                return -EOPNOTSUPP;
 
        if (!reporter->ops->dump &&
            info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP])
                return -EOPNOTSUPP;
 
-       if (info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD])
+       if (info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD]) {
                reporter->graceful_period =
                        
nla_get_u64(info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD]);
+               if (!reporter->graceful_period)
+                       reporter->graceful_period_delay = 0;
+       }
+
+       if (info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY]) {
+               u64 configured_delay =
+                       
nla_get_u64(info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY]);
+
+               if (!reporter->graceful_period && configured_delay) {
+                       NL_SET_ERR_MSG_MOD(info->extack,
+                                          "Cannot set grace period delay 
without a grace period.");
+                       return -EINVAL;
+               }
+
+               reporter->graceful_period_delay = configured_delay;
+       }
 
        if (info->attrs[DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER])
                reporter->auto_recover =
diff --git a/net/devlink/netlink_gen.c b/net/devlink/netlink_gen.c
index c50436433c18..b0f38253d163 100644
--- a/net/devlink/netlink_gen.c
+++ b/net/devlink/netlink_gen.c
@@ -389,7 +389,7 @@ static const struct nla_policy 
devlink_health_reporter_get_dump_nl_policy[DEVLIN
 };
 
 /* DEVLINK_CMD_HEALTH_REPORTER_SET - do */
-static const struct nla_policy 
devlink_health_reporter_set_nl_policy[DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP + 
1] = {
+static const struct nla_policy 
devlink_health_reporter_set_nl_policy[DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY
 + 1] = {
        [DEVLINK_ATTR_BUS_NAME] = { .type = NLA_NUL_STRING, },
        [DEVLINK_ATTR_DEV_NAME] = { .type = NLA_NUL_STRING, },
        [DEVLINK_ATTR_PORT_INDEX] = { .type = NLA_U32, },
@@ -397,6 +397,7 @@ static const struct nla_policy 
devlink_health_reporter_set_nl_policy[DEVLINK_ATT
        [DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD] = { .type = NLA_U64, },
        [DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER] = { .type = NLA_U8, },
        [DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP] = { .type = NLA_U8, },
+       [DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY] = { .type = 
NLA_U64, },
 };
 
 /* DEVLINK_CMD_HEALTH_REPORTER_RECOVER - do */
@@ -1032,7 +1033,7 @@ const struct genl_split_ops devlink_nl_ops[74] = {
                .doit           = devlink_nl_health_reporter_set_doit,
                .post_doit      = devlink_nl_post_doit,
                .policy         = devlink_health_reporter_set_nl_policy,
-               .maxattr        = DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP,
+               .maxattr        = 
DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD_DELAY,
                .flags          = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
        },
        {
-- 
2.31.1

Reply via email to