From: Marcin Szycik <[email protected]>
There are at least two paths through which VSI promiscuous mode can be
independently configured via ice_fltr_set_vsi_promisc():
- ice_vlan_rx_add_vid() (netdev op)
- ice_service_task() -> ... -> ice_set_promisc()
Both paths may try to program promiscuous mode concurrently. One such
scenario is:
1. Add ice netdev to bond
2. Add the bond netdev to bridge
3. ice netdev enters allmulticast mode (IFF_ALLMULTI)
4. Service task programs promisc mode filter
5. Bridge -> bond calls ice_vlan_rx_add_vid()
Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc()
returns any error, including -EEXIST. This causes VLAN filtering setup
to fail on the bond interface. ice_set_promisc() already handles -EEXIST
correctly.
Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the
promisc filter is already programmed, continue without returning error.
Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Cc: [email protected]
Signed-off-by: Marcin Szycik <[email protected]>
Signed-off-by: Aleksandr Loktionov <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c
b/drivers/net/ethernet/intel/ice/ice_main.c
index 8896805..cf116bb 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3755,7 +3755,7 @@ int ice_vlan_rx_add_vid(struct net_device *netdev, __be16
proto, u16 vid)
ret = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx,
ICE_MCAST_VLAN_PROMISC_BITS,
vid);
- if (ret)
+ if (ret && ret != -EEXIST)
goto finish;
}
--
2.52.0
