This is v3 of the ice fixes patchset for iwl-net. v3 changes: - Patch "ice: support RDMA on 4+-port E830 devices": gate the "RDMA functionality is not available" dev_info() on the same condition that actually disables caps->rdma, instead of printing it unconditionally whenever num_funcs > 4. This addresses Simon Horman's review comment that E830 would otherwise log a spurious warning even though RDMA stays enabled on that hardware. - Patches "ice: fix asymmetric pause negotiation reporting in ethtool" and "ice: fix autoneg disable when link partner doesn't support AN" are unchanged since v2 (Reviewed-by: Simon Horman carried forward).
This series fixes three issues in the Intel ice driver: - Asymmetric Pause capability was missing from the ethtool-reported supported link modes, causing ethtool to always show Pause as unsupported even when the hardware supports asymmetric flow control. - Autoneg disable was only attempted when AN had already completed, ignoring the case where the link partner does not advertise AN ability at all (AN37). Both conditions should allow the user to disable autoneg. - RDMA was incorrectly disabled on E830 devices with 4 or more ports because the generic port-limited-capabilities path capped maxtc=4 and then cleared the RDMA capability bit. E830 does not have that limitation and must be skipped. Konrad Knitter (1): ice: fix autoneg disable when link partner doesn't support AN Lukasz Czapnik (1): ice: support RDMA on 4+-port E830 devices Tomasz Lichwala (1): ice: fix asymmetric pause negotiation reporting in ethtool drivers/net/ethernet/intel/ice/ice_common.c | 14 +++++----- drivers/net/ethernet/intel/ice/ice_ethtool.c | 29 ++++++++++++++++++-- 2 files changed, 33 insertions(+), 10 deletions(-) -- 2.52.0
