When an skb arrives at the driver and the header length exceeds the u8
hdr_len, tucss and tucso fields in e1000_context_desc, wrapped values
are sent to the card and it hangs.

This was reproduced on an I218-V with an unprivileged Python script.

Fix it by disabling GSO and checksum offload when the header length (and
checksum offset) would exceed the field widths. Compensate for a
software-inserted VLAN tag.

Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for 
ICH9 devices only)")
Cc: [email protected]
Assisted-by: LLM
Signed-off-by: Matt Vollrath <[email protected]>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 23 +++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c 
b/drivers/net/ethernet/intel/e1000e/netdev.c
index 6f85dab5c55c5..11714032793ef 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7355,6 +7355,27 @@ static int e1000_set_features(struct net_device *netdev,
        return 1;
 }
 
+static netdev_features_t e1000_features_check(struct sk_buff *skb,
+                                             struct net_device *netdev,
+                                             netdev_features_t features)
+{
+       unsigned int hdr_len = 0;
+
+       if (skb_is_gso_tcp(skb))
+               hdr_len = skb_tcp_all_headers(skb);
+       else if (skb->ip_summed == CHECKSUM_PARTIAL)
+               hdr_len = skb_checksum_start_offset(skb) + skb->csum_offset;
+
+       if (skb_vlan_tag_present(skb) &&
+           !vlan_hw_offload_capable(features, skb->vlan_proto))
+               hdr_len += VLAN_HLEN;
+
+       if (hdr_len > U8_MAX)
+               features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+
+       return features;
+}
+
 static const struct net_device_ops e1000e_netdev_ops = {
        .ndo_open               = e1000e_open,
        .ndo_stop               = e1000e_close,
@@ -7374,7 +7395,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
 #endif
        .ndo_set_features       = e1000_set_features,
        .ndo_fix_features       = e1000_fix_features,
-       .ndo_features_check     = passthru_features_check,
+       .ndo_features_check     = e1000_features_check,
        .ndo_hwtstamp_get       = e1000e_hwtstamp_get,
        .ndo_hwtstamp_set       = e1000e_hwtstamp_set,
 };

base-commit: 7076f684d5132e6a6145e1da2fa74771ecd052e5
-- 
2.43.0

Reply via email to