Lee maybe the driver isnt working for u because i have just noticed that the INF that KingGPin suggested was a INF that i created specially for MOBILE 4 series Drivers... basically the INF is based on Rabbits INF about a 60% the other 40% is my creation... formulas and codes that i added how i know its mine? cuz every time is did upload a driver for this group or for my other site i never used the COPY-PASTE.... always had do it all over again thats why u can see that my drivers are version 5,6 and finally 7.... anyway i just wanted to tell u that if u are getting troubles with that driver mod it as the OLD SCHOOL as RABBIT said:
= Under [Intel.mfg] copy this %iLPGD0% = i945G0, PCI\VEN8086&DEV2772 %iLPGD1% = i945G1, PCI\VEN8086&DEV2776 %iCLGD0% = i945GM0, PCI\VEN8086&DEV27A2 %iCLGD1% = i945GM1, PCI\VEN8086&DEV27A6 %iCLGE0% = i945GME0, PCI\VEN8086&DEV27AE = Under General Installation Section copy this [i945G0] FeatureScore=F6 DelFiles=CUI.DelFiles CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG500.Copy, Opm.Copy, CUI.Copy, CUISDK.Copy, Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy AddReg = igfxSoftwareDX10Settings, igfxSoftwareCommonSettings, CUI.AddReg, CUISDK.AddReg , OpenGL.AddReg AddReg = OEMStaticModeAddSwSettings, HotPlugAddSwSettings, GeneralAddSwSettings, UnderscanAddSwSettings, PwrConsCantigaAddSwSettings, PwrConsDPSAddSwSettings, SDVOHDMIVSIAddSwSettings, NonEDIDModeAddSwSettings, DynamicScalingAddSwSettings, Enable3DContextsCNTEGLAddSwSettings, CRTHotPlugDefaultVrefVoltageAddSwSettings,MediaSrcModeAddSwSettings,MediaScalingAddSwSettings, HDMICEATimingsAddSwSettings, SdvoDdcEdidReadAddSwSettings, PipeOptimizationAddSwSettings, AsyncFlipsAddSwSettings, EnableInterlacedModeRemovalAddSwSettings, ForceBorderForMARAddSwSettings, IntLVDSSwingAddSwSettings, RedBlankingPnlAddSwSettings, IncFixedSegWAAddSwSettings DelReg = igfxRemoveDeviceSettings, CUI.DelReg, CUISDK.DelReg DelReg = OEMStaticModeDelSwSettings, HotPlugDelSwSettings, GeneralDelSwSettings, UnderscanDelSwSettings, PwrConsCantigaDelSwSettings, PwrConsDPSDelSwSettings, SDVOHDMIVSIDelSwSettings, NonEDIDModeDelSwSettings, DynamicScalingDelSwSettings, Enable3DContextsCNTEGLDelSwSettings, CRTHotPlugDefaultVrefVoltageDelSwSettings,MediaSrcModeDelSwSettings,MediaScalingDelSwSettings, HDMICEATimingsDelSwSettings, SdvoDdcEdidReadDelSwSettings, PipeOptimizationDelSwSettings, AsyncFlipsDelSwSettings, EnableInterlacedModeRemovalDelSwSettings, ForceBorderForMARDelSwSettings, IntLVDSSwingDelSwSettings, RedBlankingPnlDelSwSettings, IncFixedSegWA_DelSwSettings RegisterDLLs = igfx_RegisterDX10DLL [i945G1] FeatureScore=F6 DelFiles=CUI.DelFiles CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG500.Copy, Opm.Copy, CUI.Copy, CUISDK.Copy, Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy AddReg = igfxSoftwareDX10Settings, igfxSoftwareCommonSettings, CUI.AddReg, CUISDK.AddReg , OpenGL.AddReg AddReg = OEMStaticModeAddSwSettings, HotPlugAddSwSettings, GeneralAddSwSettings, UnderscanAddSwSettings, PwrConsCantigaAddSwSettings, PwrConsDPSAddSwSettings, SDVOHDMIVSIAddSwSettings, NonEDIDModeAddSwSettings, DynamicScalingAddSwSettings, Enable3DContextsCNTEGLAddSwSettings, CRTHotPlugDefaultVrefVoltageAddSwSettings,MediaSrcModeAddSwSettings,MediaScalingAddSwSettings, HDMICEATimingsAddSwSettings, SdvoDdcEdidReadAddSwSettings, PipeOptimizationAddSwSettings, AsyncFlipsAddSwSettings, EnableInterlacedModeRemovalAddSwSettings, ForceBorderForMARAddSwSettings, IntLVDSSwingAddSwSettings, RedBlankingPnlAddSwSettings, IncFixedSegWAAddSwSettings DelReg = igfxRemoveDeviceSettings, CUI.DelReg, CUISDK.DelReg DelReg = OEMStaticModeDelSwSettings, HotPlugDelSwSettings, GeneralDelSwSettings, UnderscanDelSwSettings, PwrConsCantigaDelSwSettings, PwrConsDPSDelSwSettings, SDVOHDMIVSIDelSwSettings, NonEDIDModeDelSwSettings, DynamicScalingDelSwSettings, Enable3DContextsCNTEGLDelSwSettings, CRTHotPlugDefaultVrefVoltageDelSwSettings,MediaSrcModeDelSwSettings,MediaScalingDelSwSettings, HDMICEATimingsDelSwSettings, SdvoDdcEdidReadDelSwSettings, PipeOptimizationDelSwSettings, AsyncFlipsDelSwSettings, EnableInterlacedModeRemovalDelSwSettings, ForceBorderForMARDelSwSettings, IntLVDSSwingDelSwSettings, RedBlankingPnlDelSwSettings, IncFixedSegWA_DelSwSettings RegisterDLLs = igfx_RegisterDX10DLL [i945GM0] FeatureScore=F6 DelFiles=CUI.DelFiles CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG500.Copy, Opm.Copy, CUI.Copy, CUISDK.Copy, Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy AddReg = igfxSoftwareDX10Settings, igfxSoftwareCommonSettings, CUI.AddReg, CUISDK.AddReg , OpenGL.AddReg AddReg = OEMStaticModeAddSwSettings, HotPlugAddSwSettings, GeneralAddSwSettings, UnderscanAddSwSettings, PwrConsCantigaAddSwSettings, PwrConsDPSAddSwSettings, SDVOHDMIVSIAddSwSettings, NonEDIDModeAddSwSettings, DynamicScalingAddSwSettings, Enable3DContextsCNTEGLAddSwSettings, CRTHotPlugDefaultVrefVoltageAddSwSettings,MediaSrcModeAddSwSettings,MediaScalingAddSwSettings, HDMICEATimingsAddSwSettings, SdvoDdcEdidReadAddSwSettings, PipeOptimizationAddSwSettings, AsyncFlipsAddSwSettings, EnableInterlacedModeRemovalAddSwSettings, ForceBorderForMARAddSwSettings, IntLVDSSwingAddSwSettings, RedBlankingPnlAddSwSettings, IncFixedSegWAAddSwSettings DelReg = igfxRemoveDeviceSettings, CUI.DelReg, CUISDK.DelReg DelReg = OEMStaticModeDelSwSettings, HotPlugDelSwSettings, GeneralDelSwSettings, UnderscanDelSwSettings, PwrConsCantigaDelSwSettings, PwrConsDPSDelSwSettings, SDVOHDMIVSIDelSwSettings, NonEDIDModeDelSwSettings, DynamicScalingDelSwSettings, Enable3DContextsCNTEGLDelSwSettings, CRTHotPlugDefaultVrefVoltageDelSwSettings,MediaSrcModeDelSwSettings,MediaScalingDelSwSettings, HDMICEATimingsDelSwSettings, SdvoDdcEdidReadDelSwSettings, PipeOptimizationDelSwSettings, AsyncFlipsDelSwSettings, EnableInterlacedModeRemovalDelSwSettings, ForceBorderForMARDelSwSettings, IntLVDSSwingDelSwSettings, RedBlankingPnlDelSwSettings, IncFixedSegWA_DelSwSettings RegisterDLLs = igfx_RegisterDX10DLL [i945GME0] FeatureScore=F6 DelFiles=CUI.DelFiles CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG500.Copy, Opm.Copy, CUI.Copy, CUISDK.Copy, Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy AddReg = igfxSoftwareDX10Settings, igfxSoftwareCommonSettings, CUI.AddReg, CUISDK.AddReg , OpenGL.AddReg AddReg = OEMStaticModeAddSwSettings, HotPlugAddSwSettings, GeneralAddSwSettings, UnderscanAddSwSettings, PwrConsCantigaAddSwSettings, PwrConsDPSAddSwSettings, SDVOHDMIVSIAddSwSettings, NonEDIDModeAddSwSettings, DynamicScalingAddSwSettings, Enable3DContextsCNTEGLAddSwSettings, CRTHotPlugDefaultVrefVoltageAddSwSettings,MediaSrcModeAddSwSettings,MediaScalingAddSwSettings, HDMICEATimingsAddSwSettings, SdvoDdcEdidReadAddSwSettings, PipeOptimizationAddSwSettings, AsyncFlipsAddSwSettings, EnableInterlacedModeRemovalAddSwSettings, ForceBorderForMARAddSwSettings, IntLVDSSwingAddSwSettings, RedBlankingPnlAddSwSettings, IncFixedSegWAAddSwSettings DelReg = igfxRemoveDeviceSettings, CUI.DelReg, CUISDK.DelReg DelReg = OEMStaticModeDelSwSettings, HotPlugDelSwSettings, GeneralDelSwSettings, UnderscanDelSwSettings, PwrConsCantigaDelSwSettings, PwrConsDPSDelSwSettings, SDVOHDMIVSIDelSwSettings, NonEDIDModeDelSwSettings, DynamicScalingDelSwSettings, Enable3DContextsCNTEGLDelSwSettings, CRTHotPlugDefaultVrefVoltageDelSwSettings,MediaSrcModeDelSwSettings,MediaScalingDelSwSettings, HDMICEATimingsDelSwSettings, SdvoDdcEdidReadDelSwSettings, PipeOptimizationDelSwSettings, AsyncFlipsDelSwSettings, EnableInterlacedModeRemovalDelSwSettings, ForceBorderForMARDelSwSettings, IntLVDSSwingDelSwSettings, RedBlankingPnlDelSwSettings, IncFixedSegWA_DelSwSettings RegisterDLLs = igfx_RegisterDX10DLL [i945GM1] FeatureScore=F6 DelFiles=CUI.DelFiles CopyFiles=igfx.Miniport, igfx.UserMode, MedKrnG500.Copy, Opm.Copy, CUI.Copy, CUISDK.Copy, Resource.Copy , OpenGL.Copy , DX10.Copy , CLK9.Copy AddReg = igfxSoftwareDX10Settings, igfxSoftwareCommonSettings, CUI.AddReg, CUISDK.AddReg , OpenGL.AddReg AddReg = OEMStaticModeAddSwSettings, HotPlugAddSwSettings, GeneralAddSwSettings, UnderscanAddSwSettings, PwrConsCantigaAddSwSettings, PwrConsDPSAddSwSettings, SDVOHDMIVSIAddSwSettings, NonEDIDModeAddSwSettings, DynamicScalingAddSwSettings, Enable3DContextsCNTEGLAddSwSettings, CRTHotPlugDefaultVrefVoltageAddSwSettings,MediaSrcModeAddSwSettings,MediaScalingAddSwSettings, HDMICEATimingsAddSwSettings, SdvoDdcEdidReadAddSwSettings, PipeOptimizationAddSwSettings, AsyncFlipsAddSwSettings, EnableInterlacedModeRemovalAddSwSettings, ForceBorderForMARAddSwSettings, IntLVDSSwingAddSwSettings, RedBlankingPnlAddSwSettings, IncFixedSegWAAddSwSettings DelReg = igfxRemoveDeviceSettings, CUI.DelReg, CUISDK.DelReg DelReg = OEMStaticModeDelSwSettings, HotPlugDelSwSettings, GeneralDelSwSettings, UnderscanDelSwSettings, PwrConsCantigaDelSwSettings, PwrConsDPSDelSwSettings, SDVOHDMIVSIDelSwSettings, NonEDIDModeDelSwSettings, DynamicScalingDelSwSettings, Enable3DContextsCNTEGLDelSwSettings, CRTHotPlugDefaultVrefVoltageDelSwSettings,MediaSrcModeDelSwSettings,MediaScalingDelSwSettings, HDMICEATimingsDelSwSettings, SdvoDdcEdidReadDelSwSettings, PipeOptimizationDelSwSettings, AsyncFlipsDelSwSettings, EnableInterlacedModeRemovalDelSwSettings, ForceBorderForMARDelSwSettings, IntLVDSSwingDelSwSettings, RedBlankingPnlDelSwSettings, IncFixedSegWA_DelSwSettings RegisterDLLs = igfx_RegisterDX10DLL =Just after General Installation Section you will notice the “.coinstallers”. Copy this [i945G0.CoInstallers] AddReg = CoInst.AddReg CopyFiles = CoInst.CopyFiles [i945G1.CoInstallers] AddReg = CoInst.AddReg CopyFiles = CoInst.CopyFiles [i945GM0.CoInstallers] AddReg = CoInst.AddReg CopyFiles = CoInst.CopyFiles [i945GME0.CoInstallers] AddReg = CoInst.AddReg CopyFiles = CoInst.CopyFiles [i945GM1.CoInstallers] AddReg = CoInst.AddReg CopyFiles = CoInst.CopyFiles =If now scroll a bit further you will notice Service Installation. Copy the following [i945G0.Services] AddService = igfx, 0x00000002, igfxServiceInst [i945G1.Services] AddService = igfx, 0x00000002, igfxServiceInst [i945GM0.Services] AddService = igfx, 0x00000002, igfxServiceInst [i945GME0.Services] AddService = igfx, 0x00000002, igfxServiceInst [i945GM1.Services] AddService = igfx, 0x00000002, igfxServiceInst =Scroll a bit more further u will notice “End of Device Specific Inf”. Copy this.. [i945G0.GeneralConfigData] MaximumNumberOfDevices = 2 MaximumDeviceMemoryConfiguration = 256 [i945G1.GeneralConfigData] MaximumNumberOfDevices = 2 MaximumDeviceMemoryConfiguration = 256 [i945GM0.GeneralConfigData] MaximumNumberOfDevices = 2 MaximumDeviceMemoryConfiguration = 256 [i945GME0.GeneralConfigData] MaximumNumberOfDevices = 2 MaximumDeviceMemoryConfiguration = 256 [i945GM1.GeneralConfigData] MaximumNumberOfDevices = 2 MaximumDeviceMemoryConfiguration = 256 =In the end of file you will notice “localizable Strings”. copy this.. iLPGD0 = “Intel(R) 82945G Express Chipset Family” iLPGD1 = “Intel(R) 82945G Express Chipset Family” iCLGD0 = “Mobile Intel(R) 945 Express Chipset Family” iCLGD1 = “Mobile Intel(R) 945 Express Chipset Family” iCLGE0 = “Mobile Intel(R) 945 Express Chipset Family” *mine could be better for some but belive me the feedback i have recived says that is pretty complicated to handle :) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "INTEL 9XX Gaming" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/intel9x-gaming?hl=en -~----------~----~----~----~------~----~------~--~---
