Nothing related in the debug window. I do see a lot of ParseIfCounts:: Unknown link 1 messages on other devices, however (mostly Windows 2000 servers).
-----Original Message----- From: William W. Fisher [mailto:william.w.fisher@;dartware.com] Sent: Friday, November 08, 2002 12:53 PM To: InterMapper Discussion Subject: Re: IM 3.7 APC UPS probes On Thursday, November 7, 2002, at 10:23 AM, Carr, John wrote: > Under IM 3.7 (and the later betas), I noticed that SNMP probes of my > APC UPS no longer returns the UPS-specific parameters (in particular, > temperature and % Load).� I stopped logging data for these parameters > on 11/2 so it started in whatever version I installed then (b4, I'm > guessing).� It now just returns the vanilla SNMP info. This corresponds to a change I made in b4 to the APC UPS probe. It was supposed to add support for the second environmental monitor in some devices. Can you check your Debug window (type cmd-option-shift-Z) to see if InterMapper is detecting a problem with the SNMP response? Please send this directly to me if find anything interesting. Thanks, Bill Fisher Dartware, LLC http://www.dartware.com ____________________________________________________________________ Note: To unsubscribe from this mailing list, please send email to: <mailto:InterMapper-Talk-off@;list.dartware.com> Thanks! ____________________________________________________________________ Note: To unsubscribe from this mailing list, please send email to: <mailto:InterMapper-Talk-off@;list.dartware.com> Thanks!
