The manual isn't as clear as it could be: http://www.intermapper.com/immanual/appxa/snmp.html
For Airport it states: >Airport > >InterMapper queries an Apple Airport Base Station. In addition to monitoring the >traffic statistics (using the SNMP probe above), InterMapper displays the number of >wireless clients associated with the base station along with their MAC address/user >name, and the signal strength and noise figures (0-100%). > >The parameter to the SNMP-Airport probe is the password to the Airport Base Station. What it means is the "Read/Write Community Name" is actually the Airport Base Station password as used in Airport Admin Utility (not the Airport Network password). Note that not all cards display all parameters! At 1:40 PM -0500 on 12/6/02, you (Jeff Donovan) wrote: >greetings >can anyone give me some guidance on how to monitor Apple Airports V1 (graphite) & V2 >( snow ) ? > >Specifically settings the community names and monitoring. > >Thanks > >--jeff > > >____________________________________________________________________ >Note: To unsubscribe from this mailing list, please send email to: ><mailto:[EMAIL PROTECTED]> Thanks! ,-----/----. | O | O | Rich Battin | / | Apple Certified Technician | (__ | Academy School District 20 | \___|__/ | http://www.d20.co.edu '-----\----' ____________________________________________________________________ Note: To unsubscribe from this mailing list, please send email to: <mailto:[EMAIL PROTECTED]> Thanks!
