It is still possible to make data points visible in InterMapper 4.1.2 and later. The simplest way to do so in Traditional is to double-click on the chart (to go to Chart Options), then go to the data tab, then double-click on the item you want to add data points to, and then select the appropriate highlight. I hope this is helpful.
Thanks, Ian Struckhoff Tech Support Dartware, LLC
On Mar 5, 2004, at 11:16 AM, Hans Heger wrote:
I miss the option "show datapoints" in a chart. Visible datapoints in a
chart are a very important tool/feature for me, because when a system
misses a few measurements it can be shown in a chart.
Especially when using Imapper to troubleshoot a suspect Host and you set
the polling 5 sec I want to see the "missing" datapoints!!
I am using OS 10.3 and IM4.12
with regards, Hans Heger _____________________________________________________________________ RIVM National Institute of Public Health and Environmental Protection Network Manager the Netherlands ______________________________________________________________________
____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
