Jeff /
But the issue is that Imapper 3.15 the reading the values right!!! And I
get different usage values comparing to version 4.12!!!!
My conclusion is that Imapper 4.12 fails to read correctly the interface
values.
Cisco 6000 ver 12.1(13)E4,
Problems 4.12
- Fails to read the values of a cisco 6000
- Fails the hold the log settings in a chart
- Fails to log the information in a chart
with regards Hans Heger RIVM the Netherlands
The polling Interval is 1 second in both versions
Imapper 4.15
The logfile has no header!!!!!! And when the settings aren't remembered in
the chart!!!! In Imapper 4.12 the log-rate is set to the minimum of one
minute. Question where is the rest of the data? In this way it is
impossible to make later a graphical representation.
03/17 10:00:40 0 0
03/17 10:01:40 0 0
03/17 10:02:40 0 0
03/17 10:03:40 0 0
03/17 10:04:40 0 0
03/17 10:05:41 0 0
03/17 10:06:41 0 0
03/17 10:07:41 0 0
03/17 10:08:41 0 0
Intermapper 3.15
Date Time Outgoing bytes/second for singsing [49] - "FastEthernet8/15"
Incoming bytes/second for singsing [49] - "FastEthernet8/15"
17/03 10:04:56 346337 2498669
17/03 10:05:01 0 0
17/03 10:05:07 197066 1519232
17/03 10:05:12 0 0
17/03 10:05:17 317927 6102153
17/03 10:05:21 0 0
17/03 10:05:26 72144 91038
17/03 10:05:32 0 0
17/03 10:05:37 173982 266941
17/03 10:05:42 0 0
17/03 10:05:47 374533 834791
17/03 10:05:54 0 0
17/03 10:05:59 1373472 935149
17/03 10:06:03 0 0
17/03 10:06:08 342925 2631038
17/03 10:06:13 0 0
17/03 10:06:18 266618 5154277
17/03 10:06:24 0 0
|---------+------------------------------------>
| | Jeff Kell |
| | <[EMAIL PROTECTED]> |
| | Sent by: |
| | <[EMAIL PROTECTED]|
| | rtware.com> |
| | |
| | |
| | 16-03-2004 18:56 |
| | Please respond to |
| | "InterMapper Discussion" |
| | |
|---------+------------------------------------>
>-------------------------------------------------------------------------------------------------------|
|
|
| To: InterMapper Discussion <[EMAIL PROTECTED]>
|
| cc:
|
| Subject: Re: [IM-Talk] Re: missing datapoints im 4.12
|
>-------------------------------------------------------------------------------------------------------|
Hans Heger wrote:
>
> I have notices a problem in the values is data between im 3.15 and 4.12
>
> I'm reading a cisco 6000 fastethernet interface and the utilization is
> getting above 1000%!!! ( Yes we are fast in the Netherlands)
> I am polling the same interface at the same time with im3.15 and 4.12.
> The difference you can see in the two pdf files. Bytes /sec
What IOS version are you using? It is a known bug in 12.1(20)E that the
transmitted octets is off by a factor of 1000...
Jeff Kell
University of Tennessee at Chattanooga
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
