James,
At first I thought oops, because I am a Imapper user since 1997 and I had
overseen your solution.
I really mean bulk-action, so 200 devices in one action. It cost me also a
day's work when changing 200 cisco's .
Hans Heger RIVM the Netherlands
|---------+------------------------------------>
| | "Konowal, Ed" |
| | <[EMAIL PROTECTED]> |
| | Sent by: |
| | <[EMAIL PROTECTED]|
| | rtware.com> |
| | |
| | |
| | 19-03-2004 15:34 |
| | Please respond to |
| | "InterMapper Discussion" |
| | |
|---------+------------------------------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: 'InterMapper Discussion' <[EMAIL PROTECTED]>
|
| cc:
|
| Subject: RE: [IM-Talk] SNMP community-string changing in bulk / and other
issues |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
My main IM is 3.7.1. It doesn't work... Only sets community on the one I
clicked. The group stays highlighted, but only the one changes.
-----Original Message-----
From: Ashe, James P. [mailto:[EMAIL PROTECTED]
Sent: Friday, March 19, 2004 8:46 AM
To: InterMapper Discussion
Subject: RE: [IM-Talk] SNMP community-string changing in bulk / and
other issues
the global SNMP change is already built in, and has been for as long
as i can remember...
1) select devices
2) control click one of them
3) set community
___________________________________
James P. Ashe
Systems Analyst 2
ETSU Office of Information Technology
[EMAIL PROTECTED]
OIT Help Desk - 423.439.4648
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Konowal, Ed
Sent: Friday, March 19, 2004 8:38 AM
To: 'InterMapper Discussion'
Subject: RE: [IM-Talk] SNMP community-string changing in bulk / and
other issues
Yes, a global change would be great! Last year we changed the
community strings in our entire WAN (700 SNMP devices) in an hour via
software scripting. But it took us a full day's work to get IM
matched up.
Ed Konowal
-----Original Message-----
From: Hans Heger [mailto:[EMAIL PROTECTED]
Sent: Friday, March 19, 2004 8:03 AM
To: InterMapper Discussion
Subject: [IM-Talk] SNMP community-string changing in bulk / and other
issues
SNMP community-string changing
In our network we use about 200 network devices. Recently we decided
to change the snmp- strings for security reasons.
It would be a great help when is was possible to change a few
variables in bulk
- the community-string
- the probe-type
I have also encountered the following problems
- disappearing of device-interfaces in the Maps because of
changing de
snmp-community or snmp-probe
I understand de logic of rebuilding a device when changing the
probe,
but when you choose to stop polling or change it for testing in
ping-probe there must be a possibility to stop the rebuilding.
Also could it be useful to build a delay in de rebuilding system
and a
warning with a yes/no button.
Building maps cost me a lost of time !!!!!!!
I have further more request. The question is there a overview of
the
user-requests so I can make a list?
with regards Hans Heger RIVM the Netherlands
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
