You can do that now by going into edit mode, selecting Set info / Poll Interval. However it is not persistent between restarts of the service. Such a change would be nice.
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Pat Storr Sent: Friday, June 10, 2005 12:03 PM To: InterMapper Discussion Subject: [IM-Talk] suggestion It would be helpful to have, within any particular map, the ability to poll devices at different intervals. Keep the global map polling setting, but allow individual devices to be set to independent polling intervals. For example, mission critical devices could be polled very rapidly, while less important devices could be queried at less frequent intervals. When we're trouble shooting specific devices, we sometimes turn the polling to five seconds to get a more rapid response from the device. If we leave the map set this way it dumps large amounts of traffic to all the graphs. Patrick Storr Systems Administration Northwest Internet Services 844 Wood Street Havelock, IA 50546 712-776-2222 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
