Rich,
We're using Intermapper server version InterMapper-4.3.1-1 on Fedora
Core3. I'm using InterMapper Remote version 4.3.1 on Windows. Here's
what I see on the Master side of the probe:
Device Status
Name: PTP-c11-c10-pri-orth
DNS Name: (Unknown)
Address: 172.16.100.91
Status: UP
Protocol: Wireless - Orthogon Gemini (port 161)
Up Time: 5 days, 0 hours, 29 minutes
SysName: PTP-c11-c10-pri-orth
Location: Core 11 (Schaumburg)
Availability: 100 % (of 2 minutes, 31 seconds)
Packet Loss: 0.0 % (of 21 total attempts) [Reset]
Recent Loss: None
Round-trip time: 13 msec
Bridge Information
Base Bridge Address: 00-04-56-00-07-13
Spanning Tree Root: None
Root Cost: 0
Root Port: 0
STP Priority: 0
Orthogon Gemini Information
Software Version: [N/A]
Hardware Version: [N/A]
IP Address: [N/A]
Subnet Mask: [N/A]
Gateway IP Address: [N/A]
Target MAC Address: [N/A]
Master-Slave Mode: Master
Range: 0.0 km (0.0 miles)
Active Channels: Tx: [N/A] / Rx: 0
Tx Modulation Mode: [N/A]
Rx Modulation Mode: [N/A]
Current/Max. Tx Power: 0.0/0.0 dBm
Rx Power: 0.0 dBm
Vector Error: 0.0 dB
Link Loss: 0.0 dB
Rx SNR: 0.0 dBm
Last updated Jul 06, 11:49:16; interval: 30 seconds
Reason: Vector Error high
Here's what I see on the Slave side:
Device Status
Name: PTP-c10-c11-pri-orth
DNS Name: (Unknown)
Address: 172.16.100.90
Status: UP
Protocol: Wireless - Orthogon Gemini (port 161)
Up Time: 5 days, 0 hours, 29 minutes
SysName: PTP-c10-c11-pri-orth
Location: Elgin
Availability: 100 % (of 3 minutes, 33 seconds)
Packet Loss: 0.0 % (of 25 total attempts) [Reset]
Recent Loss: None
Round-trip time: 8 msec
Bridge Information
Base Bridge Address: 00-04-56-00-07-98
Spanning Tree Root: None
Root Cost: 0
Root Port: 0
STP Priority: 0
Orthogon Gemini Information
Software Version: [N/A]
Hardware Version: [N/A]
IP Address: [N/A]
Subnet Mask: [N/A]
Gateway IP Address: [N/A]
Target MAC Address: [N/A]
Master-Slave Mode: Master
Range: 0.0 km (0.0 miles)
Active Channels: Tx: [N/A] / Rx: 0
Tx Modulation Mode: [N/A]
Rx Modulation Mode: [N/A]
Current/Max. Tx Power: 0.0/0.0 dBm
Rx Power: 0.0 dBm
Vector Error: 0.0 dB
Link Loss: 0.0 dB
Rx SNR: 0.0 dBm
Last updated Jul 06, 11:50:09; interval: 30 seconds
Reason: Vector Error high
Tim Huffman
Network Administrator
Kruger Communications
Office: 630-281-7100 ext. 335
Fax: 630-986-2495
Email: [EMAIL PROTECTED]
> -----Original Message-----
> From: [email protected] [mailto:InterMapper-
> [EMAIL PROTECTED] On Behalf Of Richard E. Brown
> Sent: Saturday, July 02, 2005 6:22 AM
> To: [email protected]
> Subject: Re: [IM-Talk] New Orthogon firmware breaks probe
>
> Tim:
>
> --- You wrote:
> Unfortunately, the Intermapper wireless probe doesn't seem to like it.
> We can't get stats from the slave side anymore. Any ideas?
> --- end of quote ---
>
> Yikes! We won't be able to look at this until after the 4 July
holiday,
> but
> would you provide us (off-list, if you prefer) more details of what
you
> see/don't see?
>
> For example, it'd be useful to have:
>
> - InterMapper version
> - Which OS (Windows, Mac, Linux) and version
> - What does the Status Window show (right-click to copy all the
text)
> - Any other information you think might be relevant.
>
> Thanks.
>
> Rich Brown [EMAIL PROTECTED]
> Dartware, LLC http://www.dartware.com
> 10 Buck Road, PO Box 130 Telephone: 603-643-2268
> Hanover, NH 03755-0130 USA Fax: 603-643-2289
>
> ____________________________________________________________________
> List archives:
> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
> To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
