Greetings... well, one of these version updates along the line somewhere
changed some of my labels. We're using mostly Cisco probes (Cisco
Proc/Mem; internal probe in IM 4.4.3). For the port labels, we use Port
Number, and Interface Alias (where we then put in a room number in the
description field on the switch itself). If there is a description for the
port, it shows up quite nicely, but if its blank, we get a big fat "ifAlias
not available" bubble.
Can it be changed back to the old way where if ifAlias is blank, to not
display anything? The obvious solution to this is to make sure all my
ports are labeled on the switches, but that'll take a while, and some
switches I dont want to label them all, or don't want to go through and
label things with a dash or "MT" or something silly. And don't want to
change the label scheme for things on a port bases on intermapper...
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
