Thank you for that info.... I have been wanting to do something along those lines and didn't think InterMapper had the capability. I have been doing this with my Packeteer but now it will be alot easier.
John _____ From: Jon Myers [mailto:[EMAIL PROTECTED] To: InterMapper Discussion [mailto:[EMAIL PROTECTED] Sent: Wed, 19 Jul 2006 16:44:15 -0400 Subject: Re: [IM-Talk] Utilization percent for Tx and Rx I'm using SNMP v2c, and I can indeed graph both the send and receive percents seperately. The values I'm looking at are on the same line as "Transmit Statistics" and "Receive Statistics". It shows "0.18 % Utilization" on one, and "0.04 % Utilization" on the other, so they are indeed different, and do not match the overall utilization (but add up to it). If they arnt there for you, maybe try a different probe? At 12:24 PM 7/19/2006, you wrote: >I guess this may be an enhancement request as it would be better as >part of the standard probes. > >Is there a way to get Transmit and Receive Utilization percent of >Total bandwidth >as two separate graphable numbers? > >John. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ****This Message was sent through the Chatham County Schools E-Mail Server**** All e-mail correspondence to and from this address is subject to the North Carolina Public Records Law, which may result in monitoring and disclosure to third parties, including law enforcement. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
