I'm not having any problems with this on a CSS 11503. We are just using
the MIB-II probe and I have Intermapper's 'Set Behavior' for the device
set as:
Map device as Switch
(x) display unnumbered interfaces
I would really like to write a probe that would change status when
services become unavailable or their load goes above a certain threshold.
I took a look at some of the MIBs for 7.50.x and came to the conclusion
that it might be complex enough to require a command-line probe written as
a script of some sort.
-c
On Fri, 13 Oct 2006, William Yardley wrote:
I wrote a support request about this, but just in case someone here has
already figured it out... Has anyone had success polling the interfaces
on a Cisco CSS (11500, for example)? Intermapper can get basic info
about the device via SNMP, but doesn't discover its interfaces.
It's running WebNS 7.50; supposedly the MIB was somewhat Ciscoized at
some point around 7.40 / 7.50..
w
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
