Same symptoms on Tiger. intermapperd process seems to try to convert maps from 4.6 version, then dies, then tries again, that happens a few times, and then it just gives up (no more evidence of it in ps).
When pre-existing Maps folder is removed, both the server and the GUI start OK with Example maps. So it seems like a conversion problem. --Szymon On 9/6/07, Chip Old <[EMAIL PROTECTED]> wrote: > I downloaded and installed IM 4.6.1, but it refused to start. I rebooted > the Mac and IM still refused to start. I installed it again, but had the > same problem. I reverted to 4.1 (luckily I kept the disk image file) and > all is well. > > I haven't examined the debug log in detail, but entries for > that time period seem to repeat the same information over and over. > > I'm running InterMapper on a Macintosh dual G4 with 1.5 GB of RAM and Mac > OS 10.4.10. > > To whom should I send the debug log? What other information do you need? > > -- > Chip Old (Francis E. Old) E-Mail: [EMAIL PROTECTED] > BCPL Network Operations Administrator Office: 410-887-6180 > BCPL.NET Internet Services Manager FAX: 410-887-2091 > Baltimore County Public Library > 320 York Road > Towson, MD 21204-5179 US > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
