Tim, You should import the MIB for the Dragonwave radio (File > Import > MIB...), then use the "STRING" type for the probe variables. Additional information can be found on this page:
http://download.dartware.com/docs/DevGuide/Content/02-CustomProbes/Probe_Var iabl es.htm Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Huffman Sent: Friday, September 21, 2007 11:39 AM To: InterMapper Discussion Subject: [IM-Talk] Custome Probe question Guys, I'm working on the finishing touches for our Dragonwave probe (which I will definitely share when I'm done), and I have a quick question: I have an OID which returns '2' if the radio link is up, or '1' if the radio link is down. Similiarly, I have another OID which returns an number that tells you what type of radio it is (for example, 1 means that it is an Air-Pair 50, 2 means that it is an Air-Pair 100, and so on). How can I set the probe up to display something meaningful under the status window (i.e. so that the radio link OID would display 'Up' if the link is up (OID returns 2) or 'Down' if the link is down (OID returns 1)? Tim Huffman Director of Engineering BOB - Business Only Broadband, LLC O (630) 590-6012 C (630) 340-1925 [EMAIL PROTECTED] www.bobbroadband.com ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
