Hi All,
We have an XRaid that, after a configuration write failure (don't ask
how) starts to report wrong, or corrupt data in the XML returned to
the Admin & InterMapper
As you will notice in the probe output belove, the Raid is responding,
but the output from the second controller is wrong/in error, but the
probe reports it as Down!
Device Status
Name: XRAID
DNS Name: (Unknown)
Address: 10.0.0.81
Status: DOWN
Ack: (Admin, 127.0.0.1) Wrong XML output frm controller
Probe: Xserve RAID (port 80)
Up Time: n/a
Availability: 0.0 % (of 18 hours, 33 minutes, 31 seconds)
TCP Failures: 100 % (of 2 total attempts)
Short-term Packet Loss: 100 % (of 2 last attempts) [Reset]
Recent Failure: 2224 attempts at 17 Jan, 03:40:06
Round-trip time: n/a msec
Xserve RAID V1.5.1
Name: XRAID
Location: Serverrum, Vesterbrogade
Left Power Supply: unknown
Right Power Supply: OK
Top Blower Speed: 3341 RPM
Lower Blower Speed: unknown
Upper Controller (1.51c):
Status: on
IP Address: 10.0.0.81
Temperature: 25 C (77 F)
Fibre Channel: Link Up (2Gb/sec)
Network: Link Up (100 Mb/sec)
Lower Controller ((NOT FOUND: ^bottom.firmware)):
Status: unknown
IP Address: (NOT FOUND: ^bottom.ip)
Temperature: unknown C (-- F)
Fibre Channel: (--)
Network: (--)
RAID 1 (level 1): OK
Drive 1: OK
Drive 2: OK
RAID 2 (level 1): OK
Drive 3: OK
Drive 4: OK
RAID 3 (level 1): OK
Drive 5: OK
Drive 6: OK
Drive 7: OK
Last updated 17 Jan, 22:13:40; interval: 30 seconds
Reason: Unexpected response (-6740).
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: [EMAIL PROTECTED]
AIM: Marook
Phone: +45 29687104
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
