Patrick, There is some information on debugging with SNMPWalk on our website:
http://dartware.com/support/docs/dev/Content/02-CustomProbes/Debugging_with_ SNMPWalk.htm As far as the "loop detected" error message, the documentation states that "the SNMPWalk expects that the OIDs received are increasing. When InterMapper receives an OID that is out of order, it would terminate the walk with an error message that indicates that a loop is detected in the walk." Have you tried loading the MIB into a MIB browser to get the OIDs? There are several free MIB browsers that you can download. Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Fowler Sent: Monday, June 02, 2008 6:38 PM To: InterMapper Discussion Subject: [IM-Talk] MIB and OID's I'm trying to write a custom probe. I have the MIB from the vendor but I'm unable to get the OID's to write the probe. The device only response to SNMP v3 and I'm unable to do an snmpwalk from my intermapper server. I uploaded the mib before I ran the snmpwalk. I receive this message: SNMPWalk command received: 'snmpwalk' SNMPWalk 10.0.4.80: to end of MIB starting from 1.0 (version SNMPv3 community '*****' maximum number of OIDs: 2000) -- 6/2/2008 16:33:04 SNMPWalk on 10.0.4.80 started SNMPWalk 10.0.4.80: iso.0 = Unknown (0x82): SNMPWalk 10.0.4.80: Loop detected, terminating walk. SNMPWalk 10.0.4.80: Finished (1 OIDs found) -- 6/2/2008 16:33:04 Thanks in advance for the help. Patrick Fowler, CCSP Network Engineer, Crocs Inc. Extreme Network Associate # 10128 ShoreTel Certified Installer ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
