In the Quick Guide to Configuring NetFlow
It would be better if it read as follows: Cisco3662(config)#ip flow-export destination <ip-address> <IDP_Port> cisco3662 (config)#ip flow-export source <ip-address> <== the IP address of Interface your IM server queries cisco3662 (config)#ip flow-export version <== e.g., 1, 5, or 9 (not all Cisco routers support all versions) cisco3662 (config)#ip flow-cache timeout active 1 <== Active flows timeout in 1 minute (not supported in all versions of IOS) cisco3662 (config)#ip flow-cache timeout inactive 15 <== Inactive flows timeout in 15 seconds (not supported in all versions of IOS) ALSO in Downloading and Installing InterMapper Flows This DOC needs to say WHERE IMFlows registration is done! It does not at this time. It says: Serial Numbers You may use the serial numbers below while testing InterMapper Flows. They will operate through 12 October 2008: It needs to also say, To find the registration window do the following: From the window displaying a router/exporter (with or without a badge showing), Right click select Flows Window. _________________________ Mike Lieberman, President Net Wright LLC Tel: 307-857-4898 Fax: 307-857-4872 ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
