I monitor the pix firewall using snmp.... The interfaces do show up ..just chart as usual .. The same for netscreen.....
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Janice Losgar Sent: Wednesday, October 01, 2008 11:37 AM To: 'InterMapper Discussion' Subject: RE: [IM-Talk] Monitor Firewall Ethernet Adaptors Bill, What probe are you using to monitor the firewall? Assuming the firewall is SNMP-enabled, you can use the SNMP Traffic probe to monitor the firewall and ethernet interfaces. Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Sexton Sent: Wednesday, October 01, 2008 11:30 AM To: [email protected] Subject: [IM-Talk] Monitor Firewall Ethernet Adaptors I have been tasked to figure out if we can monitor the ethernet ports on firewalls. We currently monitor the firewall IP but the boss wants to know if we can set Intermapper to monitor the ethernet adaptors. I'm a new guy to Intermapper so would appreciate any help you all could give me. Thanks, -billS ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
