But can you do percent of errors/discards instead of total? I have servers, that when backing up will transmit 32000-33000 packets per second, 100 discards per minute over that time is only .005% discard rate, which is "acceptable"
If that same server is talking "normally" at 200 packets per second then 100 discards per minute would .8% discard rate which would raise my eyebrows somewhat. - Chris Brizzell -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Janice Losgar Sent: Wednesday, November 26, 2008 11:26 AM To: 'InterMapper Discussion' Subject: RE: [IM-Talk] Feature for XMAS You can configure the thresholds for interface errors using the Set Info > Set Thresholds command (per device); Edit > Map Settings > Thresholds > Device (per map); or Edit > Server Settings > Device Thresholds (per server). Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of jeff donovan Sent: Wednesday, November 26, 2008 11:18 AM To: InterMapper Discussion Subject: Re: [IM-Talk] Feature for XMAS On Nov 26, 2008, at 11:10 AM, Christopher Brizzell wrote: > How about %Errors/Discards? > > If I have 5000 packets per second on a port, 50 discards per minute is > an insignificant number, whereas if it is 100 packets per second 50 > discards per minute means something. > > Chris Brizzell is there a way to set that ? -j ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
