The delay setting in the Notifier Window should do the trick. It
will wait until the condition has persisted for the set amount of
time before sending the notification.
--
Matthew Bartlett | IBM Applications On Demand | Desk ( (408)
956-2205 | Cell ( 408-802-2750 | + [EMAIL PROTECTED]
P Please consider the environment before printing this e-mail.
On Dec 3, 2008, at 5:44 PM, Jefferson Cowart wrote:
Is there any way to set different delays for different levels of
notifiers? What I'm looking for is some way to have Intermapper notify
me right away if a server goes down, but only notify me if it goes
into
alarm/warning state for 5+ minutes. (e.g. I don't want to be
notified if
the CPU/RAM temporarily spikes to a high utilization.) The only way I
can see to do it is to create a second notifier contact, but I was
hoping for something a little less kludgy.
--
Thank You
Jefferson Cowart
Network and Systems Administrator
Claremont University Consortium
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
