yes and no....... for me it is not a vertical thing, more often than not it goes off either horizontally or diagonally. But sometimes with a new switch first being seen with SNMP I get the vertical list. Yeah, that would be interesting to see a 256 port switch come up!
I wonder, can the initial mapping of those ports be inhibited? Let us turn on displayed ports manually? Make it an option? manual/automatic?? Kevin -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gibby, Joel Sent: February-06-09 6:43 PM To: InterMapper Discussion Subject: RE: [IM-Talk] Window Restricts Action -Interfaces enable/disable issues >From my experience it is because all the interfaces get laid out vertically in ascending order. So port 1 is waaaay at the top of the screen and port 48 is waaaay down at the bottom, even if you only enabled port 1 and 48. I would be scared to try it on a 256 port switch.____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
