Are you sure the AWCVX-MIB is in the IM MIB Folder?
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: ja...@hjemme.dk
AIM: Marook
Phone: +45 30787715
On 18/07/2009, at 04.52, IM-Talk-Forum wrote:
Thanks for the help Rich.
I translated those to OID's at Cisco's web site but Intermapper
still says "nosuchname". I tried forcing the scope of the OID with
AWCVX-MIB::awcDot11TpFdbLatestRxSignalStrength but no luck.
Not sure if it will help but here is a copy of the probe I am writing.
Thanks again, and sorry for being so slow.
Code:
<!--
Prototype Custom SNMP Probe (com.dartware.snmp.prototype)
Custom Probe for InterMapper (http://www.intermapper.com)
Please feel free to use this as a base for further development.
Original version 24 November 2003 by reb.
29 Jul 2005 - Minor updates
28 Oct 2005 - Updated to include display_name so it displays
properly in InterMapper 4.4 -reb
30 Mar 2006 - Changed to become a simple "Prototype" probe -reb
6 Dec 2006 - Added more tutorial information -reb
You can read the Developer Guide to learn more about InterMapper
Probes. It's at:
http://dartware.com/go.php?to=intermapper.devguide
-->
--
###############################################################################################
<header>
"type" = "custom-snmp"
"package" = "ddd.uuu"
"probe_name" = "cisco.aironet1"
"human_name" = "Aironet Received Signal Strength, SNR and data
rate"
"version" = "1.0"
"address_type" = "IP,AT"
"port_number" = "161"
display_name = "Aironet Signal Strength, SNR and data rate"
</header>
--
###############################################################################################
--
###############################################################################################
<snmp-device-properties>
-- nomib2="true"
pdutype="get-request"
-- apcups="false"
-- maxvars="10"
</snmp-device-properties>
--
###############################################################################################
--
###############################################################################################
<description>
\GB\Cisco Aironet Received Signal strength, SNR and Data rate\P\
Aironet Received Signal Strength, SNR and data rate.
</description>
--
###############################################################################################
--
###############################################################################################
-- Parameters are user-settable values that the probe uses for its
comparisons.
-- Specify the default values here. The customer can change them and
they will be retained for each device.
--<parameters>
-- "Parameter1" = "1" -- Description of Parameter1
-- "Parameter2" = "2" -- Description of Parameter2
-- "Parameter3" = "3" -- Description of Parameter3
--</parameters>
--
###############################################################################################
--
###############################################################################################
-- SNMP values to be retrieved from the device, and
-- Specify the variable name, its OID, a format (usually DEFAULT)
and a short description.
-- CALCULATION variables are computed from other values already
retrieved from the device.
<snmp-device-variables>
ifDot11RSS, AWCVX-MIB::awcDot11TpFdbLatestRxSignalStrength,
DEFAULT, "Received Signal Strength"
ifDot11SNR, AWCVX-MIB::awcDot11TpFdbLatestRxSignalQuality ,
INTEGER, "Signal-to-Noise ratio"
ifDot11DR
, .iso.org.dod.internet.mgmt.mib
-2.interfaces.ifTable.ifEntry.ifSpeed.1, DEFAULT, "Interface data
rate"
ifDot11DRCalc, ($ifDot11DR / 1000000), CALCULATION, "Mb/s"
</snmp-device-variables>
--
###############################################################################################
--
###############################################################################################
-- Specify rules for setting the device into Alarm or Warning state
<snmp-device-thresholds>
alarm: ${ifDot11SNR} < 10 "SNR is too high"
warning: ${ifDot11SNR} < 5 "SNR is critical"
alarm: ${ifDot11RSS} < -65 "Signal strength is low"
warning: ${ifDot11RSS} < -70 "Signal strength is critical"
</snmp-device-thresholds>
--
###############################################################################################
--
###############################################################################################
-- The <snmp-device-display> section specifies the text that will be
appended
-- to the device's Staus Window.
<snmp-device-display>
\B5\Aironet RSS, SNR, Data rate\P0\
\4\ RSS:\0\ ${ifDot11RSS} db
\4\ SNR:\0\ ${ifDot11SNR} db
\4\ Date Rate:\0\ ${ifDot11DRCalc} Mb/s
</snmp-device-display>
--
###############################################################################################
-------------------- m2f --------------------
Read this topic online here:
http://forums.dartware.com/viewtopic.php?p=1799#1799
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
