Paul M. Hill wrote: > I have made to devices with different probes. When made, each creates a > connection line to the proper network. After highlighting the two > devices and selecting group, the group is created but the connection > line disappears and does not reform. This cannot be intended behavior. >
After doing the group, the interfaces for only one of the member probes will be seen, the probe selected as the control probe. InterMapper will choose an SNMP probe as the control probe if there is one in the group; if not, or if you don't like InterMapper's choice, you can set the control probe by doing "Get Info" on the probe group and clicking on the star next to the member probe you want to make the control probe. (If an existing member probe is already a control probe, it's star will be filled in.) -- Christopher -- ================================= Christopher L. Sweeney Director of Software Development Dartware, LLC +1 603 643-9600 x104 http://dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
