On 2/1/2010 10:19 AM, Tom Griffin wrote:
Is there a way to mark a device as DOWN as opposed to ALARM when a
tracked interface is detected as failed? Will this only be possible with
the use of a custom probe?
Hi Tom,
You can use the SNMP - High Traffic probe to do this. This probe
monitors the ifInOctets and ifOutOctets traffic statistics of a
particular interface on the device, and sets the device into alarm or
warning when the traffic exceeds certain thresholds. It also gives a
DOWN alarm if the interface's ifOperStatus is not equal to 1 (up).
Regards,
Janice Losgar
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
