Unfortunately no
The snmp support is kind of limited
---------------------------------------------
Scott Piehn
----- Original Message -----
From: "Jakob Peterhänsel" <[email protected]>
To: "InterMapper Discussion" <[email protected]>
Sent: Thursday, February 11, 2010 11:49 AM
Subject: Re: [IM-Talk] Lookup table
Don't the device have a MIB with an entety list in it?? That would be the
correct way to go..
--
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
AIM: Marook
Phone: +45 30787715
On 11/02/2010, at 16.07, Scott Piehn wrote:
have a device that outputs it's wireless frequency as a number 1 to 200
via snmp. This relates to a frequency.
Can someone point me in the direction of converting the display from :
say 142 to it's actual frequency of 5.765 Ghz
I thought of a table as there are 200 possibilities for the conversion
Using IM 5.2.1
---------------------------------------------
Scott Piehn
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
