Hi all -
In looking into some requests for the iPhone application, I am a bit stuck
on trying to access without screen-scraping the following info (for
example), which is visible in the web interface - but differs per probe.
Cisco Device Information
CPU Percent Busy: 8 % (of last 5 seconds)
Avg. CPU % Busy: 9 % (1 min.), 9 % (5 min.)
Available Memory: 1234577 bytes
For network links this is very important. For example - I can't find an
'export' approach to get this:
Interface Statistics
Utilization: 84 % (of 0.29 GBit FD bandwidth)
Percent Err: 0.0 % (11111 pkts w/o error)
Transmit Statistics (12.0 % utilization)
Pkt/Second: 111 ( 0.0 % mcast, 0.0 % bcast)
Byte/Second: 2.2 M (111M bps)
Err/Minute: 0 (0 errors)
Disc/Minute: 0 (0 discards)
Percent Err: 0.0 % (11111 pkts w/o error)
Receive Statistics ( 24 % utilization)
Pkt/Second: 12345 ( 0.0 % mcast, 0.0 % bcast)
Byte/Second: 111 M (111M bps)
Err/Minute: 0 (0 errors)
Disc/Minute: 0 (0 discards)
Percent Err: 0.0 % (1234 pkts w/o error)
I'd ideally also want to get access to this:
Recent Outages:
12/12 21:00:11: DOWN for 5 minutes, 40 seconds
11/11 22:00:22: DOWN for 1 minute, 24 seconds
10/10 23:00:33: DOWN for 3 minutes, 41 seconds
Does anyone have any info on this?
Regards,
Mark Mackay.
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
