On 4/16/10 6:36 PM, Paul M. Hill wrote: > I setup a probe group using SNMP and LPR. I would like to use one of the SNMP > returned values, e.g., sysName, sysLocation, etc. > > It looks like the SNMP info is there, i.e., open the device status window, > double click the SNMP probe, all there. Label shows I can pick the SNMP > values, but does not fill the parameters. >
The SNMP information is not available in the probe group label. (We show the SNMP options as possible label fields for all devices, whether or not they are using SNMP probes or not and thus can show the info or not, and technically, the probe group "probe" is not an SNMP probe.) We have an outstanding enhancement request we're considering to allow the SNMP information to carry through to the probe group "probe" in several ways if the control probe is an SNMP probe, including this. I'm going to create an ER for you from your post to the list. Thanks. -- Christopher -- ================================= Christopher L. Sweeney Director of Software Development Dartware, LLC +1 603 643-9600 x104 http://dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
