Hi Chris, It isn't possible to alert on interface utilization, nor to adjust the thresholds that triggers the change in color. This is a feature request that is already in our system.
In the interim, you can use the SNMP - High Traffic probe. This probe monitors the ifInOctets and ifOutOctets traffic statistics of a particular interface on the device, and sets the device into alarm or warning when the traffic exceeds certain thresholds. It also gives a DOWN alarm if the interface's ifOperStatus is not equal to 1 (up). Since this probe only monitors one interface at a time, you would need to create a new instance of the probe for each interface you wish to monitor. You could then create a probe group for the device so you only have one icon on the map and only use one license to monitor all the interfaces. Regards, Janice Losgar Dartware, LLC On May 3, 2010, at 12:58 PM, Chris Kawchuk wrote: > 1) We'd like to receive email warnings whenever a link goes over 50% (yellow) > and 80% (orange); seems this is only stored in the event log,and can't > trigger something else to happen. > > (2) We'd like to adjust these thresholds, to say, 85% and 95% (as we're an > ISP - our links are always sitting around 70-80% at all times - generating > hose 50% threshold alarms all the time). ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
