On 5/10/10 7:58 PM, Paul M. Hill wrote: > I added the basic oid probe again within the group. Now I get a no SNMP > response error code for this new probe only. I tried a different probe using > the same procedure. Same error.
So the group includes a different instance of the Basic OID probe, an SNMP Traffic probe, and a process-and-memory probe, all of which are receiving an SNMP response, but the most-recently-added Basic OID probe is not? As you found out when you removed it from the group, this doesn't have much to do with it being in the group. The first question that comes to mind is whether the read-only community string for the Cisco 3745 is something other than "public" and was set correctly for the working probes but not for the ones reporting no response? -- Christopher -- ================================= Christopher L. Sweeney Director of Software Development Dartware, LLC +1 603 643-9600 x104 http://dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
