Michael, The Host Resources probe is a built-in probe, which means the code is hard-wired into the binary and you cannot edit the probe file itself. This Knowledge Base topic lists the variables that are tested with the Host Resources probe:
http://forums.dartware.com/viewtopic.php?t=34 This topic explains the procedure for creating custom SNMP probes: http://forums.dartware.com/viewtopic.php?t=735&highlight=host+resources Regards, Janice Losgar Dartware, LLC (603) 643-9600 x114 On May 25, 2010, at 9:16 AM, Michael Luz wrote: > We have some Cisco content engines that we monitor using the (built-in) SNMP > Host Resources probe, and we know that the variable for the CPU % busy is not > picking up the correct CPU info for these devices. We found the correct one > through Cisco documentation, we verified using GetIf and by using a Single > OID Viewer probe in Intermapper. > > I had thought if I found the HOST RESOURCES probe, I could copy it off, > modify the copy to use the correct OID/variable, and use that copy for > monitoring our content engines (re-naming it something appropriate). > > However I am not finding this easy to do! I can't locate a probe file that > easily represents the host resources probe. Is the info for this SNMP > resources probe buried in some other probe, or a set of probes that we can > get access to and modify? > > Thanks in advance! > > -Michael > > PS - Checked for probes on the user-probe page, didn't see anything related.. > if someone had a secret Cisco CE565 / CE510 / CE512 probe, that would be > pretty awesome, hehe.. > > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
